P1764 Jeep Code - Governor Pressure Sensor Too Low Conditions
Quick Answer
With the engine running, system voltage over 10v, vehicle runtime over 2 seconds, Transmission Sump Temperature input from 207-268°F, the Powertrain Control Module (PCM) detects that the Transmission Sump Temperature (TST) input was less than 1.6v for 8.36 seconds. Common causes include Faulty Governor Pressure Sensor, Governor Pressure Sensor harness is open or shorted, Governor Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1764 Jeep indicates Governor Pressure Sensor Too Low Conditions.
- Common causes
- Common causes include Faulty Governor Pressure Sensor, Governor Pressure Sensor harness is open or shorted, Governor Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1764 Jeep Description
What are the Possible Causes of the DTC P1764 Jeep?
- Faulty Governor Pressure Sensor
- Governor Pressure Sensor harness is open or shorted
- Governor Pressure Sensor circuit poor electrical connection
How to Fix the DTC P1764 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1764 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1764 Jeep code?
Need more information on how to fix the P1764 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1764 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1764 Jeep Code
1. What are the common symptoms of OBDII code P1764 in a Jeep?
- Common symptoms include harsh shifting, delayed shifting, transmission slipping, and potential stalling.
2. What does the OBDII code P1764 "Governor Pressure Sensor Too Low Conditions" indicate in a Jeep?
- This code typically indicates that the transmission is not receiving the proper pressure signal from the governor pressure sensor.
3. What are the possible causes of the P1764 code in a Jeep?
- Potential causes include a faulty governor pressure sensor, low transmission fluid level, clogged transmission filter, or a malfunctioning transmission pump.
4. How can I diagnose the P1764 code in my Jeep?
- Diagnosis involves checking the transmission fluid level and condition, inspecting the governor pressure sensor and related wiring, and performing a pressure test to determine if the sensor is functioning correctly.
5. Can driving with the P1764 code cause further damage to the Jeep's transmission?
- Continuing to drive with this code may lead to further damage to the transmission, so it is advisable to address the issue promptly.
6. How can the P1764 code be repaired in a Jeep?
- Repair options may include replacing the governor pressure sensor, ensuring proper fluid levels, changing the transmission filter, or addressing any other underlying issues causing the low pressure condition.
7. Is it safe to continue driving my Jeep with the P1764 code present?
- It is not recommended to drive the vehicle with this code present, as it can lead to transmission problems and potential safety hazards.
8. Can I reset the OBDII code P1764 in my Jeep by disconnecting the battery?
- While disconnecting the battery may clear the code temporarily, it is important to diagnose and address the underlying issue causing the code to prevent it from reoccurring.
9. How much does it typically cost to repair the P1764 code in a Jeep?
- The cost of repair can vary depending on the specific cause of the code, but it may range from a simple sensor replacement to more extensive transmission repairs.
10. Can a DIY enthusiast fix the P1764 code in a Jeep, or is it better left to professional mechanics?
- Depending on the individual's mechanical skills and access to tools, some DIY enthusiasts may be able to address the code themselves, but others may prefer to seek assistance from a professional mechanic for a thorough diagnosis and repair.
Discuss the causes and fixes for P1764 Jeep OBDII Code
Code P1764 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
