P1762 Chrysler Code - Governor Pressure Sensor Offset Voltage Too High or Low
Quick Answer
With the engine running, the Diagnostic Trouble Code (DTC) will be set when the Powertrain Control Module (PCM) detects that the Governor Pressure sensor signal was over or under the specified value stored in memory for 1.32 seconds. Common causes include Internal transmission failure, Faulty Governor Pressure Sensor, Governor Pressure Sensor harness open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1762 Chrysler indicates Governor Pressure Sensor Offset Voltage Too High or Low.
- Common causes
- Common causes include Internal transmission failure, Faulty Governor Pressure Sensor, Governor Pressure Sensor harness open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1762 Chrysler Description
What are the Possible Causes of the DTC P1762 Chrysler?
- Internal transmission failure
- Faulty Governor Pressure Sensor
- Governor Pressure Sensor harness open or shorted
- Governor Pressure Sensor circuit poor electrical connection
How to Fix the DTC P1762 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1762 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1762 Chrysler code?
Need more information on how to fix the P1762 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1762 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1762 Chrysler Code
1. What are the common symptoms of OBDII code P1762 Chrysler?
Symptoms may include harsh shifting, delayed engagement, transmission slipping, and the transmission going into limp mode.
2. What does the OBDII code P1762 Chrysler Governor Pressure Sensor Offset Voltage Too High or Low mean?
This code indicates that the voltage signal from the governor pressure sensor in the transmission is either too high or too low, affecting proper transmission operation.
3. What are the possible causes of OBDII code P1762 Chrysler?
Common causes include a faulty governor pressure sensor, damaged wiring or connectors, low transmission fluid level, or a malfunctioning transmission control module.
4. How can I diagnose OBDII code P1762 Chrysler?
Diagnosis typically involves checking the governor pressure sensor's voltage readings using a scan tool, inspecting the sensor and its wiring for damage, and verifying proper transmission fluid levels.
5. Can I continue driving with OBDII code P1762 Chrysler present?
It is not recommended to continue driving with this code as it can lead to further transmission damage or failure. It's best to address the issue promptly.
6. How can I repair OBDII code P1762 Chrysler Governor Pressure Sensor Offset Voltage Too High or Low?
Repairs may involve replacing the governor pressure sensor, repairing or replacing damaged wiring or connectors, ensuring proper transmission fluid levels, and resetting the fault code.
7. Will resetting the fault code fix OBDII code P1762 Chrysler permanently?
Resetting the fault code may temporarily clear the warning light, but if the underlying issue causing the code is not addressed, it is likely to reappear. Proper diagnosis and repair are necessary for a permanent fix.
8. Can a DIY enthusiast repair OBDII code P1762 Chrysler at home?
Depending on the individual's mechanical skills and access to tools, some DIY enthusiasts may be able to address this code at home by replacing the governor pressure sensor or checking for damaged wiring.
9. What is the typical cost to repair OBDII code P1762 Chrysler at a professional auto repair shop?
Repair costs can vary depending on the specific cause of the issue, but on average, you can expect to pay anywhere from $200 to $500 for parts and labor to address this code at a professional auto repair shop.
10. How important is it to address OBDII code P1762 Chrysler promptly?
It is crucial to address this code promptly to prevent further damage to the transmission system. Ignoring the issue can lead to more severe transmission problems and potentially costly repairs down the line.
Discuss the causes and fixes for P1762 Chrysler OBDII Code
Code P1762 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
