AutoCodes – Infiniti – P1762 2006 Infiniti G35

P1762 2006 Infiniti G35 Code - Direct Clutch Solenoid Valve

Quick Answer

Direct clutch solenoid valve is controlled by the Transmission Control Module (TCM) in response to signals sent from the PNP switch, vehicle speed sensor and accelerator pedal position sensor (throttle position sensor). Common causes include Faulty Direct Clutch Solenoid Valve, Direct Clutch Solenoid Valve harness is open or shorted, Direct Clutch Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1762 2006 Infiniti G35 indicates Direct Clutch Solenoid Valve.
Common causes
Common causes include Faulty Direct Clutch Solenoid Valve, Direct Clutch Solenoid Valve harness is open or shorted, Direct Clutch Solenoid Valve circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,064
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 15, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1762 2006 Infiniti G35 Description

Direct clutch solenoid valve is controlled by the Transmission Control Module (TCM) in response to signals sent from the PNP switch, vehicle speed sensor and accelerator pedal position sensor (throttle position sensor). Gears will then be shifted to the optimum position.
OBDII Code P1762 2006 Infiniti G35 - Direct Clutch Solenoid Valve - AutoCodes.com
P1762 2006 Infiniti G35 Code - Direct Clutch Solenoid Valve

What are the Possible Causes of the DTC P1762 2006 Infiniti G35?

  • Faulty Direct Clutch Solenoid Valve
  • Direct Clutch Solenoid Valve harness is open or shorted
  • Direct Clutch Solenoid Valve circuit poor electrical connection

How to Fix the DTC P1762 2006 Infiniti G35?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1762 2006 Infiniti G35 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1762 2006 Infiniti G35 code?

Need more information on how to fix the P1762 2006 Infiniti G35 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1762 2006 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1762 2006 Infiniti G35 Code

1. What does OBDII code P1762 on a 2006 Infiniti G35 indicate?

The OBDII code P1762 in a 2006 Infiniti G35 typically points to an issue with the Direct Clutch Solenoid Valve circuit.

2. What are the common symptoms of a Direct Clutch Solenoid Valve problem in a 2006 Infiniti G35?

Common symptoms of a Direct Clutch Solenoid Valve issue in a 2006 Infiniti G35 may include harsh shifting, transmission slipping, or the transmission going into limp mode.

3. What are the possible causes of OBDII code P1762 in a 2006 Infiniti G35?

The Direct Clutch Solenoid Valve code P1762 in a 2006 Infiniti G35 can be triggered by a faulty solenoid valve, damaged wiring, low transmission fluid, or a failing transmission control module.

4. How can I diagnose a Direct Clutch Solenoid Valve problem in my 2006 Infiniti G35?

Diagnosing a Direct Clutch Solenoid Valve issue in a 2006 Infiniti G35 typically involves checking the transmission fluid level, inspecting the wiring and connectors, and using a scan tool to monitor the solenoid valve's operation.

5. Can I continue driving my 2006 Infiniti G35 with OBDII code P1762?

It is not recommended to drive your 2006 Infiniti G35 with an unresolved Direct Clutch Solenoid Valve issue as it can lead to further damage to the transmission.

6. How much does it cost to repair a Direct Clutch Solenoid Valve problem in a 2006 Infiniti G35?

The cost to repair a Direct Clutch Solenoid Valve problem in a 2006 Infiniti G35 can vary depending on the exact cause of the issue, but it may range from $200 to $600 including parts and labor.

7. Can I replace the Direct Clutch Solenoid Valve in my 2006 Infiniti G35 myself?

Replacing the Direct Clutch Solenoid Valve in a 2006 Infiniti G35 may require some mechanical expertise and special tools, so it is recommended to consult a professional mechanic for this repair.

8. Will resetting the OBDII code P1762 in my 2006 Infiniti G35 make the issue go away?

Resetting the OBDII code P1762 in a 2006 Infiniti G35 may temporarily clear the warning light, but it will not fix the underlying issue causing the code to appear.

9. How often does the Direct Clutch Solenoid Valve need to be replaced in a 2006 Infiniti G35?

The Direct Clutch Solenoid Valve in a 2006 Infiniti G35 typically does not require regular replacement unless it fails or malfunctions due to wear and tear or other issues.

10. Are there any preventive maintenance tips to avoid OBDII code P1762 in a 2006 Infiniti G35?

To prevent OBDII code P1762 in a 2006 Infiniti G35, it is essential to maintain the transmission properly by checking and changing the transmission fluid at recommended intervals and addressing any transmission-related symptoms promptly.

Discuss the causes and fixes for P1762 2006 Infiniti G35 OBDII Code

  • Started getting P1762 code and going into limp mode. Previously, when code cleared could run through gears for a while with no MIL. Now MIL comes on immediately after clearing and driving a block. Research says direct clutch solenoid suspect or connections suspect. Trying to find out if this is something I can do. Any input much appreciated.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play