P1757 Hyundai Code - Lamp 2
Quick Answer
P1757 Hyundai indicates Lamp 2. Common causes for P1757 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1757 Hyundai indicates Lamp 2.
- Common causes
- Common causes for P1757 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1757 Hyundai Description
How to Fix the DTC P1757 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1757 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1757 Hyundai code?
Need more information on how to fix the P1757 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1757 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1757 Hyundai Code
1. What does the OBDII code P1757 mean on a Hyundai?
P1757 indicates an issue with the Lamp 2 control circuit, typically related to the transmission system's solenoid or electrical components.
2. What are the symptoms of code P1757 in a Hyundai?
Common symptoms include hard or delayed shifting, transmission staying in limp mode, decreased acceleration, and the check engine light turning on.
3. What causes the P1757 code in a Hyundai?
The code is often caused by a faulty solenoid, wiring issues in the Lamp 2 circuit, damaged connectors, or problems with the transmission control module (TCM).
4. Can driving with a P1757 code damage my Hyundai?
Driving for extended periods with this code may lead to further transmission damage or reduced performance. It's best to address the issue promptly.
5. How is the P1757 code diagnosed in a Hyundai?
A technician will check the Lamp 2 solenoid, inspect wiring and connectors for damage, and use a scan tool to monitor TCM signals and solenoid operation.
6. How do I fix the P1757 code on my Hyundai?
Repairs may involve replacing the Lamp 2 solenoid, repairing damaged wiring, cleaning connectors, or updating/replacing the TCM if necessary.
7. Is the P1757 code specific to any Hyundai models?
While it can occur on various Hyundai models, it is more common in vehicles with automatic transmissions that rely on solenoids for shifting.
8. Can a low transmission fluid level cause the P1757 code?
Low or contaminated transmission fluid can cause shifting issues, which may indirectly lead to a P1757 code being triggered.
9. Is the P1757 code related to other transmission codes?
Yes, it may appear alongside other transmission-related codes, such as P1756, which also indicate solenoid or control circuit issues.
10. How much does it cost to repair a P1757 code on a Hyundai?
Repair costs can range from $150 to $500 or more, depending on whether the issue is related to solenoid replacement, wiring repairs, or TCM replacement.
Discuss the causes and fixes for P1757 Hyundai OBDII Code
Code P1757 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
