AutoCodesMercedes-Benz – P1750 Mercedes-Benz

P1750 Mercedes-Benz Code - Electronic Gear Selector Module: Very Low Control Unit Supply Voltage

Quick Answer

P1750 Mercedes-Benz indicates Electronic Gear Selector Module: Very Low Control Unit Supply Voltage. Common causes for P1750 Mercedes-Benz include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1750 Mercedes-Benz indicates Electronic Gear Selector Module: Very Low Control Unit Supply Voltage.
Common causes
Common causes for P1750 Mercedes-Benz include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 8,693
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 14, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1750 Mercedes-Benz Description

OBDII Code P1750 Mercedes-Benz - Electronic Gear Selector Module: Very Low Control Unit Supply Voltage - AutoCodes.com
P1750 Mercedes-Benz Code - Electronic Gear Selector Module: Very Low Control Unit Supply Voltage

How to Fix the DTC P1750 Mercedes-Benz?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1750 Mercedes-Benz code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1750 Mercedes-Benz code?

Need more information on how to fix the P1750 Mercedes-Benz code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1750 Mercedes-Benz code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1750 Mercedes-Benz Code

1. What does the OBDII code P1750 mean on a Mercedes-Benz?

P1750 indicates a "Very Low Control Unit Supply Voltage" in the Electronic Gear Selector Module, suggesting an issue with the module's power supply.

2. What are the common symptoms of code P1750 in a Mercedes-Benz?

Symptoms include difficulty shifting gears, the transmission stuck in one gear (limp mode), or warning lights such as the check engine light or transmission malfunction light.

3. What causes the P1750 code to appear in a Mercedes-Benz?

Common causes include a weak or failing battery, a faulty alternator, poor electrical connections, damaged wiring, or internal failure of the Electronic Gear Selector Module.

4. Can a low vehicle battery trigger the P1750 code?

Yes, a low or failing battery can cause insufficient voltage supply to the Electronic Gear Selector Module, triggering the P1750 code.

5. How can I diagnose the P1750 code on my Mercedes-Benz?

Start by checking the battery voltage and alternator output, inspecting wiring and connections to the gear selector module, and using a diagnostic scanner to confirm the fault.

6. Is it safe to drive with the P1750 code active?

Driving with this code may not be safe, as it can lead to erratic transmission behavior or the vehicle being stuck in limp mode. It's best to address the issue promptly.

7. How do I fix the P1750 code on a Mercedes-Benz?

Repairs may include replacing a weak battery, repairing damaged wiring, cleaning electrical connections, or replacing the Electronic Gear Selector Module if it's faulty.

8. Can a blown fuse cause the P1750 code?

Yes, a blown fuse in the circuit supplying power to the Electronic Gear Selector Module can result in the P1750 code.

9. How much does it typically cost to fix the P1750 code?

The repair cost varies depending on the root cause. Battery replacement may cost $100–$300, while module replacement or wiring repairs could range from $500 to $1,500 or more.

10. Can resetting the code fix the issue temporarily?

Clearing the code may temporarily remove the warning, but the issue will likely return unless the underlying problem is fixed.

Discuss the causes and fixes for P1750 Mercedes-Benz OBDII Code

Code P1750 Mercedes-Benz comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play