P1739 Hyundai Code - General Position Encoder Fault
Quick Answer
P1739 Hyundai indicates General Position Encoder Fault. Common causes for P1739 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1739 Hyundai indicates General Position Encoder Fault.
- Common causes
- Common causes for P1739 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1739 Hyundai Description
How to Fix the DTC P1739 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1739 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1739 Hyundai code?
Need more information on how to fix the P1739 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1739 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1739 Hyundai Code
1. What does the OBDII code P1739 mean for a Hyundai?
P1739 indicates a General Position Encoder Fault, which refers to an issue with the encoder that monitors the transmission's gear position.
2. What are the common symptoms of code P1739 in a Hyundai?
Symptoms include erratic shifting, transmission slipping, failure to engage certain gears, and the Check Engine Light being illuminated.
3. What causes the P1739 code in a Hyundai?
Common causes include a faulty position encoder, damaged wiring or connectors, electrical short circuits, or a malfunctioning transmission control module (TCM).
4. Can driving with code P1739 damage my Hyundai?
Yes, driving with this code can lead to further transmission damage or unsafe driving conditions due to improper gear operation.
5. How do I diagnose the P1739 code on a Hyundai?
Diagnosis involves inspecting the position encoder, checking wiring and connectors for damage, scanning live data from the TCM, and testing for electrical shorts.
6. How is the P1739 code typically repaired on a Hyundai?
Repairs may include replacing the position encoder, repairing damaged wiring or connectors, clearing any short circuits, or reprogramming or replacing the TCM.
7. Is P1739 a serious issue for my Hyundai?
Yes, P1739 can lead to transmission performance problems and should be addressed promptly to avoid further damage.
8. Can a faulty position encoder trigger code P1739 in a Hyundai?
Yes, a malfunctioning position encoder is one of the primary causes of this code.
9. How much does it cost to repair code P1739 on a Hyundai?
Repair costs can vary widely depending on the extent of damage, ranging from $200 to $1,000 or more for parts and labor.
10. Can clearing the P1739 code fix the problem on a Hyundai?
Clearing the code will remove it temporarily, but the underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for P1739 Hyundai OBDII Code
Code P1739 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
