P1718 HYUNDAI - Steering Sensor Low Input
P1718 HYUNDAI Possible Causes
- Faulty Steering Sensor
- Steering Sensor harness is open or shorted
- Steering Sensor circuit poor electrical connection
How do I fix code P1718 HYUNDAI?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
Cost of diagnosing the P1718 HYUNDAI code
Labor: 1.0The cost of diagnosing the P1718 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P1718 HYUNDAI DescriptionThe Steering Angle Sensor is a hole plate between the photo-controller LED and the phototransistor. As the hole plate rotates during steering wheel rotation, an electrical signal will be generated depending on whether the LED light passes through the plate to the phototransistor or not. This signal which is an angle velocity of the steering wheel is made use of sensing the rotating direction & neutrality of the steering wheel. In case the ABS (ESP) system is applied to the vehicle steering angle sensor signal is sent to 4WD-ECM(TCCU) by CAN communication.
More InformationNeed more information on how to fix the P1718 HYUNDAI code?
Get Access to Factory Service Manuals
Need more help?Get the P1718 Hyundai code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1718 Hyundai code? Have you replaced any parts?
Any information is appreciated. Thanks