AutoCodes – Nissan – P1715 2010 Nissan Altima Sedan

P1715 2010 Nissan Altima Sedan Code - Input Speed Sensor Primary Speed Sensor

Quick Answer

The Engine Control Module (ECM) receives Turbine Revolution Sensor signal from Transmission Control Module (TCM) through the Control Area Network (CAN) communication line. Common causes include Faulty Turbine Revolution Sensor, Turbine Revolution Sensor harness is open or shorted, Turbine Revolution Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1715 2010 Nissan Altima Sedan indicates Input Speed Sensor Primary Speed Sensor.
Common causes
Common causes include Faulty Turbine Revolution Sensor, Turbine Revolution Sensor harness is open or shorted, Turbine Revolution Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,290
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 11, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1715 2010 Nissan Altima Sedan Description

The Engine Control Module (ECM) receives Turbine Revolution Sensor signal from Transmission Control Module (TCM) through the Control Area Network (CAN) communication line. The ECM uses this signal for engine control.
OBDII Code P1715 2010 Nissan Altima Sedan - Input Speed Sensor Primary Speed Sensor - AutoCodes.com
P1715 2010 Nissan Altima Sedan Code - Input Speed Sensor Primary Speed Sensor

What are the Possible Causes of the DTC P1715 2010 Nissan Altima Sedan?

  • Faulty Turbine Revolution Sensor
  • Turbine Revolution Sensor harness is open or shorted
  • Turbine Revolution Sensor circuit poor electrical connection
  • Faulty Transmission Control Module (TCM)

How to Fix the DTC P1715 2010 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1715 2010 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1715 2010 Nissan Altima Sedan code?

Need more information on how to fix the P1715 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1715 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1715 2010 Nissan Altima Sedan Code

1. What does the OBDII code P1715 mean for a 2010 Nissan Altima Sedan?

P1715 indicates an issue with the Input Speed Sensor or Primary Speed Sensor, which monitors the transmission's input shaft speed to ensure proper operation.

2. What are the common symptoms of the P1715 code on a 2010 Nissan Altima?

Symptoms may include erratic shifting, transmission slipping, poor acceleration, reduced fuel efficiency, or the Check Engine Light being illuminated.

3. What causes the P1715 code to appear in a 2010 Nissan Altima?

Common causes include a faulty input speed sensor, damaged wiring or connectors, a malfunctioning transmission control module (TCM), or transmission fluid issues.

4. Can I drive my 2010 Nissan Altima with the P1715 code?

It is not recommended to drive for extended periods as this code can cause transmission performance issues, potentially leading to further damage.

5. How do I diagnose the P1715 code on a 2010 Nissan Altima?

Diagnosis involves using an OBDII scanner, checking the speed sensor's electrical connections, inspecting the sensor for damage, and testing its output with a multimeter.

6. How do I fix the P1715 code on my 2010 Nissan Altima?

Repairs may include replacing the input speed sensor, repairing damaged wiring, cleaning electrical connectors, or updating/reprogramming the TCM if needed.

7. How much does it cost to repair the P1715 code on a 2010 Nissan Altima?

The cost varies but generally includes $50-$150 for a sensor replacement and additional labor costs if performed by a professional.

8. Can dirty or low transmission fluid cause the P1715 code?

Yes, dirty or insufficient transmission fluid can affect sensor performance and cause the code to appear.

9. Where is the input speed sensor located on the 2010 Nissan Altima?

The input speed sensor is typically located on the transmission housing, near the input shaft.

10. Does the P1715 code always require sensor replacement?

No, sometimes the issue can be resolved by repairing wiring, cleaning connections, or addressing related transmission problems.

Discuss the causes and fixes for P1715 2010 Nissan Altima Sedan OBDII Code

Code P1715 2010 Nissan Altima Sedan comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play