P1705 2010 Nissan Rogue Code - Throttle Position Sensor
Quick Answer
The Electric Throttle Control (ETC) Actuator consists of the Throttle Control Motor, Accelerator Pedal Position (APP) Sensor, Throttle Position Sensor (TPS), etc. Common causes include Faulty Electric Throttle Control (ETC) Actuator, Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1705 2010 Nissan Rogue indicates Throttle Position Sensor.
- Common causes
- Common causes include Faulty Electric Throttle Control (ETC) Actuator, Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1705 2010 Nissan Rogue Description
What are the Possible Causes of the DTC P1705 2010 Nissan Rogue?
- Faulty Electric Throttle Control (ETC) Actuator
- Electric Throttle Control Actuator harness is open or shorted
- Electric Throttle Control Actuator circuit poor electrical connection
How to Fix the DTC P1705 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1705 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1705 2010 Nissan Rogue code?
Need more information on how to fix the P1705 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1705 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1705 2010 Nissan Rogue Code
1. What does OBDII code P1705 mean on a 2010 Nissan Rogue?
- OBDII code P1705 on a 2010 Nissan Rogue indicates a malfunction in the throttle position sensor circuit.
2. What are the common symptoms of a faulty throttle position sensor on a 2010 Nissan Rogue?
- Common symptoms include rough idling, poor acceleration, stalling, and possibly the vehicle going into "limp mode."
3. What are the possible causes of OBDII code P1705 on a 2010 Nissan Rogue?
- The potential causes could be a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module.
4. How can I diagnose a throttle position sensor issue on my 2010 Nissan Rogue?
- Diagnostic steps may involve using a scan tool to retrieve the code, checking the sensor's voltage readings, inspecting wiring for damage, and testing the sensor's functionality.
5. Can driving with a faulty throttle position sensor cause further damage to my 2010 Nissan Rogue?
- Yes, driving with a faulty throttle position sensor can lead to poor engine performance, decreased fuel efficiency, and potentially cause further damage to other engine components.
6. Is it safe to continue driving my 2010 Nissan Rogue with OBDII code P1705?
- It is not recommended to drive the vehicle with a confirmed throttle position sensor issue as it can compromise safety and cause more severe problems.
7. How much does it typically cost to repair or replace a throttle position sensor on a 2010 Nissan Rogue?
- The cost of repairing or replacing a throttle position sensor on a 2010 Nissan Rogue can vary, but it generally ranges from $100 to $300 including parts and labor.
8. Are there any DIY repair tips for fixing a throttle position sensor issue on a 2010 Nissan Rogue?
- DIY repair tips may include cleaning the sensor, checking and cleaning the connectors, and ensuring proper installation to address minor issues.
9. Can resetting the vehicle's ECU clear the OBDII code P1705 on a 2010 Nissan Rogue?
- Resetting the ECU may temporarily clear the code, but if the underlying issue with the throttle position sensor persists, the code is likely to reappear.
10. How long does it take to replace a throttle position sensor on a 2010 Nissan Rogue?
- The replacement of a throttle position sensor on a 2010 Nissan Rogue typically takes around 1 to 2 hours for a professional mechanic to complete.
Discuss the causes and fixes for P1705 2010 Nissan Rogue OBDII Code
Code P1705 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
