AutoCodesNissan – P1705 2009 Nissan Rogue

P1705 2009 Nissan Rogue Code - Throttle Position Sensor

Quick Answer

The Electric Throttle Control (ETC) Actuator consists of the Throttle Control Motor, Accelerator Pedal Position (APP) Sensor, Throttle Position Sensor (TPS), etc. Common causes include Faulty Electric Throttle Control (ETC) Actuator, Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1705 2009 Nissan Rogue indicates Throttle Position Sensor.
Common causes
Common causes include Faulty Electric Throttle Control (ETC) Actuator, Electric Throttle Control Actuator harness is open or shorted, Electric Throttle Control Actuator circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,047
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 30, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1705 2009 Nissan Rogue Description

The Electric Throttle Control (ETC) Actuator consists of the Throttle Control Motor, Accelerator Pedal Position (APP) Sensor, Throttle Position Sensor (TPS), etc. The actuator sends a signal to the Engine Control Module (ECM), and ECM sends signals to Transmission Control Module (TCM) with Controller Area Network (CAN) communication. The Diagnostic Trouble Code (DTC) will set when the Throttle Position Sensor does not respond from the TCM signal.
OBDII Code P1705 2009 Nissan Rogue - Throttle Position Sensor - AutoCodes.com
P1705 2009 Nissan Rogue Code - Throttle Position Sensor

What are the Possible Causes of the DTC P1705 2009 Nissan Rogue?

  • Faulty Electric Throttle Control (ETC) Actuator
  • Electric Throttle Control Actuator harness is open or shorted
  • Electric Throttle Control Actuator circuit poor electrical connection

How to Fix the DTC P1705 2009 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1705 2009 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1705 2009 Nissan Rogue code?

Need more information on how to fix the P1705 2009 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1705 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1705 2009 Nissan Rogue Code

1. What does OBDII code P1705 mean on a 2009 Nissan Rogue?

Code P1705 indicates a malfunction in the throttle position sensor (TPS) circuit or its communication with the transmission control module (TCM).

2. What are the common symptoms of code P1705 in a 2009 Nissan Rogue?

Symptoms may include poor acceleration, delayed shifting, hesitation during gear changes, the check engine light illuminated, or the vehicle entering limp mode.

3. What causes the P1705 code to appear?

Common causes include a faulty throttle position sensor, damaged wiring or connectors, a malfunctioning transmission control module, or a misadjusted TPS.

4. Can I drive my 2009 Nissan Rogue with a P1705 code?

While the vehicle may still be drivable, it’s not recommended as the issue can lead to poor performance, potential transmission damage, or unsafe driving conditions.

5. How do I diagnose the P1705 code on a 2009 Nissan Rogue?

Use an OBDII scanner to confirm the code, inspect the TPS and its wiring for damage, and test the sensor’s voltage output using a multimeter.

6. How do I fix a P1705 code on a 2009 Nissan Rogue?

Repairs may include replacing the throttle position sensor, repairing or replacing damaged wiring, clearing the code with an OBDII scanner, or recalibrating the TPS.

7. How much does it cost to fix a P1705 code on a 2009 Nissan Rogue?

Replacing the TPS typically costs $100–$300, including parts and labor, though the total cost depends on the exact cause of the issue.

8. Does the P1705 code always mean the throttle position sensor is bad?

Not necessarily. It could also be caused by wiring issues, a bad TCM, or poor connections within the TPS circuit.

9. Can a dirty throttle body cause a P1705 code?

Yes, a dirty throttle body can interfere with the TPS’s operation and trigger the code. Cleaning the throttle body may resolve the issue in some cases.

10. Do I need to recalibrate the throttle position sensor after replacing it?

Yes, recalibration or relearning is often necessary after replacing the TPS to ensure proper operation and communication with the transmission control module.

Discuss the causes and fixes for P1705 2009 Nissan Rogue OBDII Code

Code P1705 2009 Nissan Rogue comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play