AutoCodes – Subaru – P1703 Subaru

P1703 Subaru Code - Shift Solenoid Low Clutch Timing Circuit Malfunction

Quick Answer

P1703 Subaru indicates Shift Solenoid Low Clutch Timing Circuit Malfunction. Common causes include Faulty Shift Solenoid (SS), Shift Solenoid (SS) harness is open or shorted, Shift Solenoid (SS) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1703 Subaru indicates Shift Solenoid Low Clutch Timing Circuit Malfunction.
Common causes: Common causes include Faulty Shift Solenoid (SS), Shift Solenoid (SS) harness is open or shorted, Shift Solenoid (SS) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,366

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 11, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1703 Subaru Description

OBDII Code P1703 Subaru - Shift Solenoid Low Clutch Timing Circuit Malfunction - AutoCodes.com — P1703 Subaru Code - Shift Solenoid Low Clutch Timing Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P1703 Subaru?

Faulty Shift Solenoid (SS)
Shift Solenoid (SS) harness is open or shorted
Shift Solenoid (SS) circuit poor electrical connection

How to Fix the DTC P1703 Subaru?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1703 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1703 Subaru code?

Need more information on how to fix the P1703 Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1703 Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1703 Subaru Code

1. What are the common symptoms of OBDII code P1703 in a Subaru?

The common symptoms of OBDII code P1703 in a Subaru include transmission shifting issues, harsh shifting, delayed shifting, and potential stalling.

2. What can cause the Shift Solenoid Low Clutch Timing Circuit Malfunction in a Subaru?

The Shift Solenoid Low Clutch Timing Circuit Malfunction (OBDII code P1703) in a Subaru can be caused by a faulty shift solenoid, wiring issues, low transmission fluid level, or a malfunctioning TCM (Transmission Control Module).

3. How serious is OBDII code P1703 in a Subaru?

OBDII code P1703 should be addressed promptly, as it can lead to further transmission problems if left unresolved. Ignoring this code may result in more severe issues and potential damage to the transmission system.

4. Can I continue driving my Subaru with OBDII code P1703?

While it may be possible to drive the vehicle with OBDII code P1703, it is recommended to address the issue as soon as possible to prevent further damage to the transmission system. Continued driving with this code may exacerbate the problem.

5. How is OBDII code P1703 diagnosed in a Subaru?

Diagnosing OBDII code P1703 in a Subaru typically involves using a scan tool to retrieve the code, conducting a visual inspection of the transmission system, checking the transmission fluid level and condition, and testing the shift solenoids and related components.

6. Can I repair OBDII code P1703 in a Subaru myself?

Repairing OBDII code P1703 in a Subaru may require advanced automotive knowledge and specialized tools. If you are experienced in transmission repairs and diagnostics, you may be able to address the issue yourself. Otherwise, it is recommended to seek professional assistance.

7. What are some tips for repairing OBDII code P1703 in a Subaru?

Some tips for repairing OBDII code P1703 in a Subaru include checking the transmission fluid level and quality, inspecting the wiring for any damage or loose connections, testing the shift solenoids, and ensuring the TCM is functioning correctly.

8. How much does it cost to repair OBDII code P1703 in a Subaru?

The cost of repairing OBDII code P1703 in a Subaru can vary depending on the root cause of the issue, the extent of the repairs needed, and the labor rates in your area. It is recommended to obtain quotes from reputable automotive shops for an accurate estimate.

9. Can resetting the OBDII codes clear P1703 in a Subaru?

Resetting the OBDII codes may temporarily clear the P1703 code in a Subaru, but it will not fix the underlying issue causing the malfunction. It is important to diagnose and address the root cause of the problem to prevent the code from reoccurring.

10. Will driving with OBDII code P1703 damage my Subaru transmission?

Continued driving with OBDII code P1703 in a Subaru can potentially cause damage to the transmission system, especially if the root cause of the issue is not addressed promptly. It is advisable to address the code as soon as possible to prevent further damage.