P1703 2010 Ford Fusion Code - Brake On/Off Switch Out of Self-Test Range
Quick Answer
Indicates that during the Key On Engine Off (KOEO) self-test, the Brake Pedal Position (BPD) signal was high, or during the Key ON Engine Running (KOER) self-test, the BPP signal di not cycle high and low. Common causes include Brake Pedal Position Switch harness is open or shorted, Brake Pedal Position Switch circuit poor electrical connection, Damage Brake Switch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1703 2010 Ford Fusion indicates Brake On/Off Switch Out of Self-Test Range.
- Common causes
- Common causes include Brake Pedal Position Switch harness is open or shorted, Brake Pedal Position Switch circuit poor electrical connection, Damage Brake Switch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1703 2010 Ford Fusion Description
What are the Possible Causes of the DTC P1703 2010 Ford Fusion?
- Brake Pedal Position Switch harness is open or shorted
- Brake Pedal Position Switch circuit poor electrical connection
- Damage Brake Switch
- Misadjusted Brake Switch
How to Fix the DTC P1703 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1703 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1703 2010 Ford Fusion code?
Need more information on how to fix the P1703 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1703 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1703 2010 Ford Fusion Code
1. What does the OBDII code P1703 mean on a 2010 Ford Fusion?
The P1703 code indicates that the Brake On/Off (BOO) switch signal is out of the expected range during the self-test.
2. What are the common symptoms of the P1703 code?
Symptoms may include the brake lights not working properly, issues with cruise control disengagement, or no noticeable symptoms at all.
3. What causes the P1703 code to appear?
Common causes include a faulty brake on/off switch, damaged wiring or connectors, or a misadjusted brake pedal sensor.
4. Can I drive my 2010 Ford Fusion with the P1703 code?
Yes, but it’s not recommended as the brake lights or cruise control may not function correctly, which could lead to safety issues.
5. How do I diagnose the P1703 code?
Check the brake lights for proper operation, inspect the brake on/off switch, and examine the wiring and connectors for damage or disconnection.
6. How do I fix the P1703 code on a 2010 Ford Fusion?
Repair or replace the brake on/off switch if faulty, adjust the brake pedal sensor if necessary, and repair any damaged wiring or connectors.
7. Where is the brake on/off switch located in a 2010 Ford Fusion?
The brake on/off switch is typically located near the top of the brake pedal assembly inside the vehicle.
8. Can a bad brake light bulb trigger the P1703 code?
No, the P1703 code is specifically related to the brake on/off switch and its circuit, not the brake light bulbs.
9. Does a P1703 code affect cruise control operation?
Yes, a faulty brake on/off switch may prevent the cruise control from disengaging as intended, which could pose a safety risk.
10. How much does it cost to fix a P1703 code?
Repair costs can range from $50 to $200, depending on whether the brake on/off switch needs replacement or if there are wiring issues to address.
Discuss the causes and fixes for P1703 2010 Ford Fusion OBDII Code
Code P1703 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
