P1703 2006 Ford Fusion Code - Brake On/Off Switch Out of Self-Test Range
Quick Answer
Indicates that during the Key On Engine Off (KOEO) self-test, the Brake Pedal Position (BPD) signal was high, or during the Key ON Engine Running (KOER) self-test, the BPP signal di not cycle high and low. Common causes include Brake Pedal Position Switch harness is open or shorted, Brake Pedal Position Switch circuit poor electrical connection, Damage Brake Switch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1703 2006 Ford Fusion indicates Brake On/Off Switch Out of Self-Test Range.
- Common causes
- Common causes include Brake Pedal Position Switch harness is open or shorted, Brake Pedal Position Switch circuit poor electrical connection, Damage Brake Switch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1703 2006 Ford Fusion Description
What are the Possible Causes of the DTC P1703 2006 Ford Fusion?
- Brake Pedal Position Switch harness is open or shorted
- Brake Pedal Position Switch circuit poor electrical connection
- Damage Brake Switch
- Misadjusted Brake Switch
How to Fix the DTC P1703 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1703 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1703 2006 Ford Fusion code?
Need more information on how to fix the P1703 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1703 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1703 2006 Ford Fusion Code
1. What are the common symptoms of OBDII code P1703 on a 2006 Ford Fusion?
The common symptoms of code P1703, Brake On/Off Switch Out of Self-Test Range, on a 2006 Ford Fusion include issues with the brake lights, cruise control not working, and the inability to shift out of park.
2. What could cause the OBDII code P1703 to appear on a 2006 Ford Fusion?
The most common cause of code P1703 on a 2006 Ford Fusion is a faulty brake on/off switch. This switch is used to detect the status of the brake pedal, and when it malfunctions, it can trigger the code.
3. How can I diagnose the Brake On/Off Switch on my 2006 Ford Fusion?
To diagnose the Brake On/Off Switch on your 2006 Ford Fusion, you can use a multimeter to test the continuity and functionality of the switch. Additionally, visually inspecting the switch for any signs of damage can also help in diagnosing the issue.
4. Can a faulty Brake On/Off Switch be repaired, or does it need to be replaced?
In most cases, a faulty Brake On/Off Switch on a 2006 Ford Fusion will need to be replaced rather than repaired. Replacement of the switch is a relatively straightforward process that can be done by following the manufacturer's instructions.
5. Are there any DIY tips for fixing OBDII code P1703 on a 2006 Ford Fusion?
If you are experiencing code P1703 on your 2006 Ford Fusion, you can start by checking the brake on/off switch for any visible damage or loose connections. If the switch appears to be faulty, replacing it may resolve the issue.
6. Will driving with OBDII code P1703 on a 2006 Ford Fusion cause any further damage?
While driving with code P1703 may not cause immediate damage to your 2006 Ford Fusion, it is recommended to address the issue promptly. Ignoring the code can lead to safety concerns such as non-functional brake lights and potential issues with shifting gears.
7. Can a mechanic reset the OBDII code P1703 on a 2006 Ford Fusion without fixing the underlying issue?
A mechanic can clear the OBDII code P1703 from the system, but if the underlying issue with the Brake On/Off Switch is not addressed, the code is likely to reappear once the vehicle is driven again.
8. Is it safe to continue driving my 2006 Ford Fusion with OBDII code P1703 present?
It is not recommended to continue driving your 2006 Ford Fusion with OBDII code P1703 present, as it can indicate a potential issue with the brake system. It is best to address the problem promptly to ensure the safety and proper functioning of your vehicle.
9. How much does it typically cost to replace a faulty Brake On/Off Switch on a 2006 Ford Fusion?
The cost of replacing a faulty Brake On/Off Switch on a 2006 Ford Fusion can vary depending on the labor rates of the repair shop and the cost of the replacement part. On average, the total cost including parts and labor can range from $50 to $150.
10. Can I prevent OBDII code P1703 from appearing on my 2006 Ford Fusion in the future?
To prevent OBDII code P1703 from appearing on your 2006 Ford Fusion in the future, it is essential to perform regular maintenance checks on the brake on/off switch and address any issues promptly. Additionally, following the manufacturer's maintenance schedule can help prevent such codes from occurring.
Discuss the causes and fixes for P1703 2006 Ford Fusion OBDII Code
Code P1703 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
