P16F2 Code - Control Module Transmission Direction Range Switch
Quick Answer
The hybrid powertrain control module compares the internal mode switch requested direction to other data to verify that the indicated direction range switch calculation is correct. Common causes include Faulty Drive Motor Generator Power Inverter Module, Drive Motor Generator Power Inverter Module harness is open or shorted, Drive Motor Generator Power Inverter Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P16F2 indicates Control Module Transmission Direction Range Switch.
- Common causes
- Common causes include Faulty Drive Motor Generator Power Inverter Module, Drive Motor Generator Power Inverter Module harness is open or shorted, Drive Motor Generator Power Inverter Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P16F2 Description
What are the Possible Causes of the DTC P16F2?
- Faulty Drive Motor Generator Power Inverter Module
- Drive Motor Generator Power Inverter Module harness is open or shorted
- Drive Motor Generator Power Inverter Module circuit poor electrical connection
How to Fix the DTC P16F2?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P16F2 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P16F2 code?
Need more information on how to fix the P16F2 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P16F2 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P16F2 Acura — ECM Internal Circuit Malfunction Starter Control Circuit Malfunction
- P16F2 Buick — Control Module Transmission Direction Range Switch
- P16F2 Cadillac — Control Module Transmission Direction Range Switch
- P16F2 Chevrolet — Control Module Transmission Direction Range Switch
- P16F2 GMC — Control Module Transmission Direction Range Switch
- P16F2 Honda — ECM Internal Circuit Malfunction Starter Control Circuit Malfunction
Frequently Asked Questions about P16F2 Code
1. What are the common symptoms of an OBDII code P16F2 related to the Control Module Transmission Direction Range Switch?
- Common symptoms include issues with shifting gears, transmission not engaging properly, and warning lights on the dashboard.
2. What could cause the OBDII code P16F2 to trigger in relation to the Control Module Transmission Direction Range Switch?
- The code can be triggered by a faulty transmission range switch, damaged wiring or connectors, or issues with the control module itself.
3. How can I diagnose the OBDII code P16F2 for the Control Module Transmission Direction Range Switch?
- Diagnosis involves using a scan tool to read the code, checking the transmission range switch for proper operation, and inspecting the wiring and connectors for any damage.
4. Can a DIY enthusiast repair the OBDII code P16F2 related to the Control Module Transmission Direction Range Switch?
- While some basic checks like inspecting wiring connections can be done by DIY enthusiasts, diagnosing and repairing issues related to the transmission range switch may require professional expertise.
5. What are the potential risks of ignoring the OBDII code P16F2 linked to the Control Module Transmission Direction Range Switch?
- Ignoring the code can lead to further damage to the transmission system, reduced fuel efficiency, and potentially unsafe driving conditions.
6. Is it safe to drive with the OBDII code P16F2 active for the Control Module Transmission Direction Range Switch?
- It is not recommended to drive with the code active as it can lead to unpredictable transmission behavior and potential safety hazards.
7. How much does it typically cost to repair the OBDII code P16F2 concerning the Control Module Transmission Direction Range Switch?
- The cost of repair can vary depending on the specific issue, but it may involve replacing the transmission range switch, fixing wiring problems, or reprogramming the control module.
8. Can resetting the OBDII code P16F2 related to the Control Module Transmission Direction Range Switch temporarily resolve the issue?
- Resetting the code may temporarily clear the warning light, but if the underlying problem is not addressed, the code is likely to reappear.
9. Are there any preventive measures to avoid encountering the OBDII code P16F2 associated with the Control Module Transmission Direction Range Switch?
- Regular maintenance checks, prompt attention to any transmission issues, and keeping an eye on warning lights can help prevent the occurrence of this code.
10. How long does it take to repair the OBDII code P16F2 for the Control Module Transmission Direction Range Switch?
- The repair time can vary based on the specific cause of the code, but it may take a few hours to a full day, depending on the complexity of the issue and the availability of parts.
Discuss the causes and fixes for P16F2 OBDII Code
Code P16F2 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
