AutoCodes – Chevrolet – P16EE Chevrolet

P16EE Chevrolet Code - Control Module Serial Peripheral Interface Bus 7

Quick Answer

This diagnostic applies to internal microprocessor integrity conditions within the device. Common causes include Low battery voltage, Reprogram Powertrain Control Module (PCM), Faulty Powertrain Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P16EE Chevrolet indicates Control Module Serial Peripheral Interface Bus 7.
Common causes: Common causes include Low battery voltage, Reprogram Powertrain Control Module (PCM), Faulty Powertrain Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 995

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 26, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P16EE Chevrolet Description

This diagnostic applies to internal microprocessor integrity conditions within the device. This diagnostic also addresses if the device is not programmed. The device monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. The Diagnostic Trouble Code (DTC) will be set when the device detects an internal malfunction or incomplete programming.

OBDII Code P16EE Chevrolet - Control Module Serial Peripheral Interface Bus 7 - AutoCodes.com — P16EE Chevrolet Code - Control Module Serial Peripheral Interface Bus 7

What does this mean?

What are the Possible Causes of the DTC P16EE Chevrolet?

Low battery voltage
Reprogram Powertrain Control Module (PCM)
Faulty Powertrain Control Module
Powertrain Control Module harness is open or shorted
Powertrain Control Module circuit poor electrical connection

How to Fix the DTC P16EE Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P16EE Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P16EE Chevrolet code?

Need more information on how to fix the P16EE Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P16EE Chevrolet code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P16EE Chevrolet Code

1. What does OBDII code P16EE for Chevrolet indicate?

The P16EE code specifically refers to a fault in the Control Module Serial Peripheral Interface Bus 7.

2. What are the common symptoms of OBDII code P16EE in a Chevrolet vehicle?

Common symptoms of code P16EE may include engine stalling, rough idling, poor performance, and the illumination of the Check Engine Light.

3. What can cause the OBDII code P16EE to trigger in a Chevrolet?

The P16EE code in a Chevrolet is often triggered by a malfunction in the Control Module Serial Peripheral Interface Bus 7, which can be caused by wiring issues, a faulty control module, or communication errors.

4. How serious is the OBDII code P16EE in a Chevrolet?

While the P16EE code may not pose an immediate danger to the vehicle, it can lead to drivability issues and potential engine performance problems if left unresolved.

5. Can I drive my Chevrolet with the OBDII code P16EE?

It is generally not recommended to drive your Chevrolet with an active P16EE code, as it can affect the vehicle's performance and potentially cause further damage.

6. How do I diagnose the OBDII code P16EE in my Chevrolet?

Diagnosing the P16EE code typically involves using an OBDII scanner to retrieve the specific fault code, checking the wiring connections, and inspecting the control module for any visible issues.

7. What are some repair tips for fixing the OBDII code P16EE in a Chevrolet?

Repairing the P16EE code may involve repairing or replacing damaged wiring, resetting the control module, or replacing the control module as needed.

8. Can resetting the OBDII code P16EE in a Chevrolet make it go away permanently?

Resetting the code may temporarily clear the Check Engine Light, but if the underlying issue causing the P16EE code is not addressed, it is likely to reappear.

9. How much does it cost to fix the OBDII code P16EE in a Chevrolet?

The cost of fixing the P16EE code can vary depending on the specific cause of the issue, but it may involve labor costs for diagnosis and repair, as well as potential parts replacement.

10. Can I fix the OBDII code P16EE in my Chevrolet myself?

While some DIY enthusiasts may attempt to diagnose and repair the P16EE code themselves, it is recommended to seek professional help, especially if dealing with control module or wiring issues.