AutoCodes – GMC – P16E9 GMC

P16E9 GMC Code - Control Module Serial Peripheral Interface Bus 2

Quick Answer

This diagnostic applies to internal microprocessor integrity conditions within the device. Common causes include Low battery voltage, Reprogram Powertrain Control Module (PCM), Faulty Powertrain Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P16E9 GMC indicates Control Module Serial Peripheral Interface Bus 2.
Common causes: Common causes include Low battery voltage, Reprogram Powertrain Control Module (PCM), Faulty Powertrain Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,972

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 26, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P16E9 GMC Description

This diagnostic applies to internal microprocessor integrity conditions within the device. This diagnostic also addresses if the device is not programmed. The device monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. The Diagnostic Trouble Code (DTC) will be set when the device detects an internal malfunction or incomplete programming.

OBDII Code P16E9 GMC - Control Module Serial Peripheral Interface Bus 2 - AutoCodes.com — P16E9 GMC Code - Control Module Serial Peripheral Interface Bus 2

What does this mean?

What are the Possible Causes of the DTC P16E9 GMC?

Low battery voltage
Reprogram Powertrain Control Module (PCM)
Faulty Powertrain Control Module
Powertrain Control Module harness is open or shorted
Powertrain Control Module circuit poor electrical connection

How to Fix the DTC P16E9 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P16E9 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P16E9 GMC code?

Need more information on how to fix the P16E9 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P16E9 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P16E9 GMC Code

What does the OBDII code P16E9 mean for GMC vehicles?

1. The P16E9 code indicates an issue with the Control Module Serial Peripheral Interface (SPI) Bus 2, which involves communication between control modules in the vehicle. 2.

What are the common symptoms of a P16E9 code in GMC vehicles?

Symptoms may include the check engine light turning on, communication errors between modules, intermittent electrical issues, or poor vehicle performance. 3.

What causes the P16E9 code to appear in GMC vehicles?

Common causes include faulty wiring or connectors in the SPI Bus 2 circuit, a malfunctioning control module, or software issues in the affected module. 4.

Can the P16E9 code cause drivability issues?

Yes, depending on the module affected, the code may cause issues like reduced performance, erratic shifting, or trouble starting the vehicle. 5.

How do you diagnose a P16E9 code in a GMC vehicle?

Diagnosis typically involves scanning for related codes, inspecting SPI Bus 2 wiring and connectors, and testing the affected control modules for proper operation. 6.

Can a software update fix the P16E9 code?

In some cases, a software update for the affected control module may resolve the issue if itâ€™s caused by a programming error. 7.

Is it safe to drive with a P16E9 code present?

It depends on the severity of the symptoms. If the vehicle is experiencing significant performance issues, itâ€™s best to address the problem promptly. 8.

What is the cost of repairing a P16E9 code in a GMC vehicle?

The cost varies depending on whether the issue is with wiring, connectors, or a control module. Repairs can range from $100 for minor fixes to over $1,000 for module replacement. 9.

Can I clear the P16E9 code without repairing the issue?

While you can clear the code temporarily with a scan tool, it will likely return if the underlying issue isnâ€™t resolved. 10.

Should I take my GMC to a professional for a P16E9 code?

Yes, due to the complexity of SPI Bus systems and potential module programming, itâ€™s recommended to have a professional diagnose and repair the issue.