P16E4 2018 GMC Sierra Code - Sensor Communication Circuit 3 Low Voltage
Quick Answer
The Engine Control Module (ECM) uses the Fuel Rail Pressure (FRP) sensor to constantly adjust the high-pressure fuel pump's feed rate so that the ideal pressure is permanently maintained in the high-pressure section (between the high-pressure fuel pump and the injectors) by means of closed-loop control. Common causes include Low or no fuel, Faulty Fuel Rail Pressure (FRP) Sensor, Fuel Rail Pressure harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P16E4 2018 GMC Sierra indicates Sensor Communication Circuit 3 Low Voltage.
- Common causes
- Common causes include Low or no fuel, Faulty Fuel Rail Pressure (FRP) Sensor, Fuel Rail Pressure harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P16E4 2018 GMC Sierra Description
What are the Possible Causes of the DTC P16E4 2018 GMC Sierra?
- Low or no fuel
- Faulty Fuel Rail Pressure (FRP) Sensor
- Fuel Rail Pressure harness is open or shorted
- Fuel Rail Pressure circuit poor electrical connection
- Faulty Fuel Pump
How to Fix the DTC P16E4 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P16E4 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P16E4 2018 GMC Sierra code?
Need more information on how to fix the P16E4 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P16E4 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P16E4 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code P16E4 in a 2018 GMC Sierra?
The common symptoms of code P16E4 "Sensor Communication Circuit 3 Low Voltage" in a 2018 GMC Sierra may include rough idling, poor engine performance, and illuminated check engine light.
2. What can cause the OBDII code P16E4 to trigger in a 2018 GMC Sierra?
The P16E4 code in a 2018 GMC Sierra is typically triggered by a malfunction in the sensor communication circuit 3, leading to lower than normal voltage levels.
3. How serious is the OBDII code P16E4 "Sensor Communication Circuit 3 Low Voltage" in a 2018 GMC Sierra?
While the code itself may not cause immediate driving issues, it is important to address it promptly to prevent potential long-term damage to the vehicle's systems.
4. How can I diagnose the OBDII code P16E4 in my 2018 GMC Sierra?
Diagnosing the P16E4 code usually involves using an OBDII scanner to read the code, followed by inspecting the sensor communication circuit 3 for any wiring issues or sensor malfunctions.
5. What are some DIY repair tips for fixing OBDII code P16E4 in a 2018 GMC Sierra?
DIY repair tips for addressing the P16E4 code may include checking and repairing any damaged wiring in the sensor communication circuit 3 or replacing the faulty sensor causing the low voltage.
6. Can I continue driving my 2018 GMC Sierra with the OBDII code P16E4 present?
While it may be possible to continue driving with the code present, it is advisable to address the issue promptly to prevent potential performance issues and further damage to the vehicle.
7. Will resetting the OBDII code P16E4 in my 2018 GMC Sierra make it go away permanently?
Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the P16E4 code is not fixed, it is likely to reappear.
8. Is it safe to clear the OBDII code P16E4 using an OBDII scanner in my 2018 GMC Sierra?
Clearing the code using an OBDII scanner is safe and a common practice, but remember that it will not fix the underlying issue causing the P16E4 code to trigger.
9. How much does it cost to repair OBDII code P16E4 in a 2018 GMC Sierra?
The cost of repairing the P16E4 code can vary depending on the specific cause, such as wiring repairs or sensor replacement. It is recommended to consult a mechanic for an accurate estimate.
10. Can a faulty battery or alternator cause the OBDII code P16E4 to appear in a 2018 GMC Sierra?
While a faulty battery or alternator can cause electrical issues in a vehicle, they are less likely to directly trigger the P16E4 code. Focus on diagnosing the sensor communication circuit 3 for this specific code.
Discuss the causes and fixes for P16E4 2018 GMC Sierra OBDII Code
Code P16E4 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
