P16E4 2017 GMC Sierra Code - Sensor Communication Circuit 3 Low Voltage
Quick Answer
The Engine Control Module (ECM) uses the Fuel Rail Pressure (FRP) sensor to constantly adjust the high-pressure fuel pump's feed rate so that the ideal pressure is permanently maintained in the high-pressure section (between the high-pressure fuel pump and the injectors) by means of closed-loop control. Common causes include Low or no fuel, Faulty Fuel Rail Pressure (FRP) Sensor, Fuel Rail Pressure harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P16E4 2017 GMC Sierra indicates Sensor Communication Circuit 3 Low Voltage.
- Common causes
- Common causes include Low or no fuel, Faulty Fuel Rail Pressure (FRP) Sensor, Fuel Rail Pressure harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P16E4 2017 GMC Sierra Description
What are the Possible Causes of the DTC P16E4 2017 GMC Sierra?
- Low or no fuel
- Faulty Fuel Rail Pressure (FRP) Sensor
- Fuel Rail Pressure harness is open or shorted
- Fuel Rail Pressure circuit poor electrical connection
- Faulty Fuel Pump
How to Fix the DTC P16E4 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P16E4 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P16E4 2017 GMC Sierra code?
Need more information on how to fix the P16E4 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P16E4 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P16E4 2017 GMC Sierra Code
What does the OBDII code P16E4 mean on a 2017 GMC Sierra?
Code P16E4 indicates a "Sensor Communication Circuit 3 Low Voltage," meaning there is an issue with the voltage signal in one of the communication circuits used by the vehicle's sensors.
What are common symptoms of code P16E4 in a 2017 GMC Sierra?
Symptoms may include warning lights on the dashboard, reduced engine performance, issues with sensor data readings, or erratic engine behavior.
What causes the P16E4 code in a 2017 GMC Sierra?
Common causes include damaged wiring, loose connectors, a faulty sensor, or issues with the circuit itself, such as corrosion or short circuits.
Can a faulty sensor trigger the P16E4 code?
Yes, a malfunctioning sensor that uses communication circuit 3 can result in low voltage and trigger this code.
How can I diagnose the P16E4 code on my GMC Sierra?
Start by inspecting the wiring and connectors for damage or corrosion, then check the affected sensor's voltage readings using a multimeter or diagnostic tool.
Can driving with the P16E4 code cause further damage?
It’s possible, as the vehicle might not operate with optimal sensor data, leading to reduced performance or strain on other components.
How do I fix the P16E4 code on a 2017 GMC Sierra?
Repairs may include replacing damaged wiring, cleaning connectors, or replacing the faulty sensor causing the low voltage issue.
Do I need a professional to fix the P16E4 code?
While some fixes, like checking connectors, can be done at home, a professional may be required for advanced diagnostics or sensor replacement.
Can a software update fix the P16E4 code?
In rare cases, a software update may resolve communication issues, but most often, the problem is hardware-related.
What tools are needed to address the P16E4 code?
You may need a diagnostic scanner, a multimeter, and basic automotive tools to inspect and repair wiring or replace sensors.
Discuss the causes and fixes for P16E4 2017 GMC Sierra OBDII Code
Code P16E4 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
