P16D7 Chevrolet Code - Sensor Supply Voltage Relay Control Circuit
Quick Answer
The Reductant Control Module Relay 1 & 2 supply ignition voltage to the Reductant Control Module. Common causes include Faulty Reductant Control Module Relay, Reductant Control Module Relay harness is open or shorted, Reductant Control Module Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P16D7 Chevrolet indicates Sensor Supply Voltage Relay Control Circuit.
- Common causes
- Common causes include Faulty Reductant Control Module Relay, Reductant Control Module Relay harness is open or shorted, Reductant Control Module Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P16D7 Chevrolet Description
The Diagnostic Trouble Code (DTC) will be set when the ECM detects an open circuit, short to voltage or short to ground on the Reductant Control Module Relay control circuit.
What are the Possible Causes of the DTC P16D7 Chevrolet?
- Faulty Reductant Control Module Relay
- Reductant Control Module Relay harness is open or shorted
- Reductant Control Module Relay circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P16D7 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P16D7 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P16D7 Chevrolet code?
Need more information on how to fix the P16D7 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P16D7 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P16D7 Chevrolet Code
1. What are common symptoms of OBDII code P16D7 in a Chevrolet related to the Sensor Supply Voltage Relay Control Circuit?
- Common symptoms include engine stalling, rough idling, poor acceleration, and illuminated Check Engine Light.
2. What are the possible causes of OBDII code P16D7 in a Chevrolet?
- Possible causes include a faulty sensor supply voltage relay, damaged wiring or connectors, low battery voltage, or a malfunctioning engine control module (ECM).
3. How can I diagnose the Sensor Supply Voltage Relay Control Circuit issue causing OBDII code P16D7 in my Chevrolet?
- Use a multimeter to test the voltage at the sensor supply voltage relay, check for continuity in the wiring, and inspect for any visible damage or corrosion in the circuit.
4. Can a DIY enthusiast repair the Sensor Supply Voltage Relay Control Circuit issue triggering OBDII code P16D7?
- While it's possible for experienced DIYers to repair this issue, it's recommended to consult a professional mechanic for accurate diagnosis and proper repair.
5. Is it safe to continue driving my Chevrolet with OBDII code P16D7 related to the Sensor Supply Voltage Relay Control Circuit?
- It's not recommended to drive your vehicle with this issue as it can lead to further damage and potential safety hazards. Have it inspected and repaired promptly.
6. How much does it typically cost to repair the Sensor Supply Voltage Relay Control Circuit problem causing OBDII code P16D7 in a Chevrolet?
- Repair costs can vary depending on the extent of the damage and the specific repairs needed. It's advisable to get quotes from different mechanics for an accurate estimate.
7. Can a dead car battery cause OBDII code P16D7 to appear in a Chevrolet?
- Yes, a low or dead car battery can sometimes trigger this code due to insufficient voltage supply to the sensor relay. Ensure your battery is in good condition before diagnosing further.
8. Are there any common related codes that may accompany OBDII code P16D7 in a Chevrolet?
- Yes, codes related to sensor circuits, voltage supply issues, or ECM communication problems may also be present alongside P16D7. It's important to address all relevant codes.
9. Can a loose or corroded connection at the sensor supply voltage relay cause OBDII code P16D7 in a Chevrolet?
- Absolutely. Loose or corroded connections can disrupt the voltage supply to the sensors, triggering the P16D7 code. Ensure all connections are secure and clean during diagnosis.
10. Is it necessary to reset the ECM after repairing the Sensor Supply Voltage Relay Control Circuit issue causing OBDII code P16D7 in a Chevrolet?
- Yes, resetting the ECM is recommended after any repair to clear the error codes and allow the system to relearn the corrected parameters.
Discuss the causes and fixes for P16D7 Chevrolet OBDII Code
Code P16D7 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
