P16D2 GMC Code - Intake Rocker Arm Solenoid Valve 2 Control Circuit Low Voltage
Quick Answer
The rocker arm actuator system enables the Engine Control Module (ECM) to change the camshaft lift and duration while the engine is operating. Common causes include Faulty Intake Rocker Arm Solenoid Valve 2, Intake Rocker Arm Solenoid Valve 2 harness is open or shorted, Intake Rocker Arm Solenoid Valve 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P16D2 GMC indicates Intake Rocker Arm Solenoid Valve 2 Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty Intake Rocker Arm Solenoid Valve 2, Intake Rocker Arm Solenoid Valve 2 harness is open or shorted, Intake Rocker Arm Solenoid Valve 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P16D2 GMC Description
The rocker arm solenoid valve receives a signal from the ECM. The ECM controls the rocker arm solenoid valve by supplying a 12 V PWM signal. The ECM supplies a ground to the low reference circuit.
What are the Possible Causes of the DTC P16D2 GMC?
- Faulty Intake Rocker Arm Solenoid Valve 2
- Intake Rocker Arm Solenoid Valve 2 harness is open or shorted
- Intake Rocker Arm Solenoid Valve 2 circuit poor electrical connection
How to Fix the DTC P16D2 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P16D2 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P16D2 GMC code?
Need more information on how to fix the P16D2 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P16D2 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P16D2 GMC Code
1. What are the common symptoms of OBDII code P16D2 GMC?
The common symptoms of code P16D2 GMC include rough idling, decreased engine performance, and potential stalling of the vehicle.
2. What can cause the Intake Rocker Arm Solenoid Valve 2 Control Circuit Low Voltage code?
The P16D2 code in a GMC vehicle is typically triggered by issues such as a faulty intake rocker arm solenoid valve, damaged wiring, or poor electrical connections.
3. How serious is the P16D2 GMC trouble code?
While the vehicle may still be operable with the P16D2 code, it is important to address it promptly to prevent potential engine damage and ensure optimal performance.
4. Can I continue driving with the P16D2 code present?
It is not recommended to continue driving with the P16D2 code active, as it may lead to further damage to the engine or other components over time.
5. How can I diagnose the underlying issue causing the P16D2 code?
Diagnosing the cause of the P16D2 code typically involves conducting a thorough inspection of the intake rocker arm solenoid valve, checking for wiring defects, and using a scan tool to analyze the circuit voltage.
6. What are some possible repair tips for resolving the P16D2 GMC trouble code?
Repair tips for addressing the P16D2 code may include replacing the defective intake rocker arm solenoid valve, repairing damaged wiring, and ensuring proper electrical connections.
7. Can a DIY enthusiast fix the P16D2 code issue?
While some experienced DIY enthusiasts may be able to address the P16D2 code themselves, it is recommended to seek professional help to accurately diagnose and repair the underlying problem.
8. How much does it typically cost to repair the P16D2 GMC trouble code?
The cost of repairing the P16D2 code can vary depending on the extent of the issue, parts needed for replacement, and labor costs, but it is advisable to budget for a few hundred dollars.
9. Are there any preventative measures to avoid the P16D2 code in the future?
Regular maintenance, such as inspecting electrical connections and components, can help prevent issues like the P16D2 code from occurring in the future.
10. Can resetting the trouble code temporarily fix the issue?
Resetting the P16D2 trouble code may temporarily clear the error, but if the underlying problem is not addressed, the code is likely to reappear.
Discuss the causes and fixes for P16D2 GMC OBDII Code
Code P16D2 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
