P1684 2008 Honda Accord Code - Throttle Valve Return Spring Performance Problem
Quick Answer
The electronic throttle control system controls the throttle valve opening. Common causes include Dirty throttle body, Throttle body harness is open or shorted, Throttle body circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1684 2008 Honda Accord indicates Throttle Valve Return Spring Performance Problem.
- Common causes
- Common causes include Dirty throttle body, Throttle body harness is open or shorted, Throttle body circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1684 2008 Honda Accord Description
The APP sensor is operated via the throttle cable to determine the accelerator opening value when the driver presses the accelerator pedal. The accelerator pedal opening value is converted to a signal in the APP sensor and transmitted to the ECM to compute the target position. The target position signal is then transmitted to the throttle actuator control module.
The throttle actuator control module determines the throttle valve target position according to the signal received and operates the throttle actuator to move the throttle valve to the target position. The actual throttle valve position is determined by TP sensor A installed in the throttle body.
The throttle actuator control module compares the throttle valve target opening angle and the actual throttle valve opening angle from TP sensor A, and when the difference exceeds the specification, the throttle actuator control module transmits the malfunction data to the ECM. When the ECM receives the malfunction data from the throttle actuator control module,the ECM detects the malfunction of the throttle actuator system and a DTC is stored.
What are the Possible Causes of the DTC P1684 2008 Honda Accord?
- Dirty throttle body
- Throttle body harness is open or shorted
- Throttle body circuit poor electrical connection
- Faulty throttle body
How to Fix the DTC P1684 2008 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1684 2008 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1684 2008 Honda Accord code?
Need more information on how to fix the P1684 2008 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1684 2008 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1684 2008 Honda Accord Code
1. What are the common symptoms of OBDII code P1684 on a 2008 Honda Accord related to the Throttle Valve Return Spring Performance Problem?
- Common symptoms include reduced engine performance, rough idling, stalling, and difficulty accelerating.
2. What could cause the Throttle Valve Return Spring Performance Problem in a 2008 Honda Accord triggering OBDII code P1684?
- The issue is often caused by a faulty throttle body, a worn-out throttle valve return spring, or a problem with the throttle position sensor.
3. How can I diagnose the Throttle Valve Return Spring Performance Problem on my 2008 Honda Accord when OBDII code P1684 is detected?
- Diagnose by inspecting the throttle body, checking the condition of the throttle valve return spring, and testing the throttle position sensor using a scan tool.
4. Can I continue driving my 2008 Honda Accord with the OBDII code P1684 related to the Throttle Valve Return Spring Performance Problem?
- It is not recommended to continue driving the vehicle as the issue can lead to further damage and affect the overall performance of the engine.
5. What is the typical repair procedure for fixing the Throttle Valve Return Spring Performance Problem on a 2008 Honda Accord with OBDII code P1684?
- The repair usually involves replacing the throttle body, installing a new throttle valve return spring, and calibrating or replacing the throttle position sensor.
6. Are there any DIY tips for addressing the Throttle Valve Return Spring Performance Problem on a 2008 Honda Accord?
- While some basic inspections can be done at home, it is recommended to have a professional mechanic diagnose and repair the issue to ensure proper fix and avoid further complications.
7. How much does it typically cost to repair the Throttle Valve Return Spring Performance Problem triggering OBDII code P1684 on a 2008 Honda Accord?
- The cost can vary depending on the extent of the damage and the parts needed, but it could range from $200 to $500 for parts and labor.
8. Can a dirty throttle body cause the Throttle Valve Return Spring Performance Problem and trigger OBDII code P1684 on a 2008 Honda Accord?
- Yes, a dirty or clogged throttle body can affect the performance of the throttle valve return spring and lead to the triggering of OBDII code P1684.
9. Is it possible for the Throttle Valve Return Spring Performance Problem on a 2008 Honda Accord to cause other issues besides triggering OBDII code P1684?
- Yes, if left unresolved, the issue can lead to poor fuel efficiency, engine misfires, and potential damage to other engine components.
10. How long does it take to repair the Throttle Valve Return Spring Performance Problem on a 2008 Honda Accord with OBDII code P1684?
- The repair process typically takes a few hours to complete, but it may vary based on the severity of the issue and the availability of parts.
Discuss the causes and fixes for P1684 2008 Honda Accord OBDII Code
Code P1684 2008 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
