AutoCodesGMC – P1675 GMC

P1675 GMC Code - EVAP Vent Solenoid Control Circuit

Quick Answer

The Engine Control Module (ECM) has detected an improper voltage level on the output driver module for the EVAP canister vent solenoid control circuit Common causes include EVAP canister vent control solenoid harness is open or shorted, EVAP canister vent control solenoid circuit poor electrical connection, Faulty EVAP canister vent control solenoid. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P1675 GMC indicates EVAP Vent Solenoid Control Circuit.
Common causes
Common causes include EVAP canister vent control solenoid harness is open or shorted, EVAP canister vent control solenoid circuit poor electrical connection, Faulty EVAP canister vent control solenoid.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,962
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 08, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1675 GMC Description

The Engine Control Module (ECM) has detected an improper voltage level on the output driver module for the EVAP canister vent solenoid control circuit
OBDII Code P1675 GMC - EVAP Vent Solenoid Control Circuit - AutoCodes.com
P1675 GMC Code - EVAP Vent Solenoid Control Circuit

What are the Possible Causes of the DTC P1675 GMC?

  • EVAP canister vent control solenoid harness is open or shorted
  • EVAP canister vent control solenoid circuit poor electrical connection
  • Faulty EVAP canister vent control solenoid

How to Fix the DTC P1675 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1675 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1675 GMC code?

Need more information on how to fix the P1675 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1675 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1675 GMC Code

1. What does the OBDII code P1675 mean on a GMC vehicle?

P1675 indicates a problem with the EVAP Vent Solenoid Control Circuit, which is part of the vehicle's evaporative emissions control system.

2. What are the common symptoms of code P1675 in a GMC?

Common symptoms include an illuminated check engine light, difficulty refueling due to tank pressure, and potential fuel odors near the vehicle.

3. What causes the P1675 code to appear in GMC vehicles?

Causes can include a faulty EVAP vent solenoid, damaged wiring or connectors in the circuit, or a malfunctioning ECM.

4. Can I drive my GMC with the P1675 code?

While the vehicle may still be drivable, it's not recommended to ignore this issue as it can impact fuel efficiency and emissions compliance.

5. How do I diagnose the P1675 code on a GMC?

Start by visually inspecting the EVAP vent solenoid, wiring, and connectors for damage, then use a multimeter to test the circuit and solenoid for proper function.

6. How is the P1675 code fixed in a GMC vehicle?

Repairs may involve replacing the EVAP vent solenoid, repairing damaged wiring or connectors, or reprogramming the ECM if necessary.

7. What tools are needed to address the P1675 code in a GMC?

You'll typically need a diagnostic scanner, a multimeter, and basic hand tools for inspection and repairs.

8. Is the P1675 code related to fuel system performance issues?

Yes, the P1675 code can affect the EVAP system's ability to manage fuel vapors, potentially leading to pressure issues and reduced efficiency.

9. How much does it cost to fix the P1675 code on a GMC?

Repair costs vary, but replacing the EVAP vent solenoid typically costs $100-$300, depending on labor rates and part prices.

10. Can a loose gas cap cause the P1675 code on a GMC?

No, a loose gas cap usually triggers other EVAP-related codes, but it’s still a good idea to check and rule it out.

Discuss the causes and fixes for P1675 GMC OBDII Code

Code P1675 GMC comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play