P1674 2007 Ford Fusion Code - Control Module Software Corrupted
Quick Answer
The Throttle Actuator Control (TAC) system is in the Failure Mode Effects Management (FMEM) mode of forced engine shutdown. Common causes include Software incompatibility issue, Damaged Powertrain Control Module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1674 2007 Ford Fusion indicates Control Module Software Corrupted .
- Common causes
- Common causes include Software incompatibility issue, Damaged Powertrain Control Module (PCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1674 2007 Ford Fusion Description
What are the Possible Causes of the DTC P1674 2007 Ford Fusion?
- Software incompatibility issue
- Damaged Powertrain Control Module (PCM)
How to Fix the DTC P1674 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1674 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1674 2007 Ford Fusion code?
Need more information on how to fix the P1674 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1674 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1674 2007 Ford Fusion Code
1. What does the OBDII code P1674 mean on a 2007 Ford Fusion?
P1674 indicates that the control module software has been corrupted, which can interfere with proper vehicle operation.
2. What are the common symptoms of code P1674 in a 2007 Ford Fusion?
Symptoms may include the Check Engine Light turning on, reduced engine performance, difficulty starting the vehicle, or erratic transmission behavior.
3. What causes the P1674 code to appear on a 2007 Ford Fusion?
Possible causes include a failed software update, a corrupted control module, electrical issues such as loose connections, or a failing PCM (Powertrain Control Module).
4. Can I continue driving with the P1674 code on my 2007 Ford Fusion?
It’s not recommended to drive for an extended period with this code, as it could lead to further system malfunctions or damage.
5. How can I fix the P1674 code on my 2007 Ford Fusion?
Repairs may involve reprogramming or re-flashing the PCM, checking and repairing electrical connections, or replacing the PCM if necessary.
6. Is the PCM always the problem with code P1674 on a 2007 Ford Fusion?
Not always. While the PCM is a common culprit, the issue could also stem from faulty wiring, failed software updates, or improper installation of aftermarket components.
7. How much does it cost to fix the P1674 code on a 2007 Ford Fusion?
Costs vary depending on the repair. Reprogramming the PCM may cost $100–$200, but replacing the PCM can cost $500–$1,000, including parts and labor.
8. Can a dead battery cause the P1674 code on a 2007 Ford Fusion?
Yes, a completely discharged or improperly replaced battery can sometimes cause software corruption in the control module.
9. Do I need to take my 2007 Ford Fusion to a dealership to fix the P1674 code?
While dealerships are equipped to handle PCM reprogramming, many independent repair shops with advanced diagnostic tools can also address this issue.
10. How can I prevent the P1674 code on my 2007 Ford Fusion?
Regular maintenance, ensuring proper battery voltage, and avoiding incomplete software updates can help prevent control module software corruption.
Discuss the causes and fixes for P1674 2007 Ford Fusion OBDII Code
Code P1674 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
