P1651 2010 Ford Fusion Code - Power Steering Pressure Switch Input Fault
Quick Answer
The Powertrain Control Module (PCM) counts the number of vehicle speed transitions from 0 to a calibrated speed. Common causes include Vehicle towed with engine running, Faulty Power Steering Pressure (PSP), Power Steering Pressure (PSP) harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P1651 2010 Ford Fusion indicates Power Steering Pressure Switch Input Fault.
- Common causes
- Common causes include Vehicle towed with engine running, Faulty Power Steering Pressure (PSP), Power Steering Pressure (PSP) harness is open or shorted.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P1651 2010 Ford Fusion Description
What are the Possible Causes of the DTC P1651 2010 Ford Fusion?
- Vehicle towed with engine running
- Faulty Power Steering Pressure (PSP)
- Power Steering Pressure (PSP) harness is open or shorted
- Power Steering Pressure (PSP) circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P1651 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1651 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1651 2010 Ford Fusion code?
Need more information on how to fix the P1651 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1651 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1651 2010 Ford Fusion Code
1. What are the common symptoms of OBDII code P1651 in a 2010 Ford Fusion related to the Power Steering Pressure Switch Input Fault?
- Common symptoms include difficulty steering, loss of power steering assistance, illuminated power steering warning light on the dashboard, and potential steering wheel stiffness.
2. What are the possible causes of OBDII code P1651 in a 2010 Ford Fusion?
- The code P1651 in a 2010 Ford Fusion is typically triggered by a faulty power steering pressure switch, damaged wiring or connectors in the power steering system, or a malfunctioning power steering control module.
3. How can I diagnose the Power Steering Pressure Switch Input Fault causing OBDII code P1651 in my 2010 Ford Fusion?
- To diagnose the issue, you can use an OBDII scanner to retrieve the trouble code P1651. Additionally, you can visually inspect the power steering pressure switch and its wiring for any signs of damage or corrosion.
4. Is it safe to continue driving my 2010 Ford Fusion with OBDII code P1651 related to the Power Steering Pressure Switch Input Fault?
- It is not recommended to drive the vehicle with a power steering issue as it can lead to difficulty controlling the car, especially at lower speeds or when parking. It is advisable to address the problem promptly.
5. How can I repair OBDII code P1651 in my 2010 Ford Fusion caused by the Power Steering Pressure Switch Input Fault?
- The repair process typically involves replacing the faulty power steering pressure switch, repairing or replacing damaged wiring or connectors, and clearing the trouble code with an OBDII scanner.
6. Can a DIY enthusiast fix OBDII code P1651 in a 2010 Ford Fusion related to the Power Steering Pressure Switch Input Fault?
- Depending on your level of experience and access to tools, a DIY enthusiast may be able to replace the power steering pressure switch. However, complex diagnosis and repairs involving the power steering system may require professional assistance.
7. Will resetting the trouble code associated with OBDII code P1651 in my 2010 Ford Fusion solve the Power Steering Pressure Switch Input Fault?
- Resetting the trouble code may temporarily clear the warning light, but it will not fix the underlying issue causing the fault. It is essential to diagnose and address the root cause of the problem for a lasting solution.
8. Are there any preventive maintenance tips to avoid OBDII code P1651 related to the Power Steering Pressure Switch Input Fault in my 2010 Ford Fusion?
- Regularly inspecting the power steering system for signs of wear, ensuring proper fluid levels, and addressing any unusual steering behavior promptly can help prevent issues leading to code P1651.
9. How much can I expect to pay for repairing OBDII code P1651 in a 2010 Ford Fusion caused by the Power Steering Pressure Switch Input Fault?
- Repair costs can vary depending on the extent of the issue and whether you choose to address it yourself or seek professional help. Costs may include parts, labor, and diagnostic fees.
10. Can a disconnected or malfunctioning power steering pressure switch impact the overall performance of my 2010 Ford Fusion beyond triggering OBDII code P1651?
- Yes, a malfunctioning power steering pressure switch can affect the performance and safety of your vehicle by potentially causing erratic power steering assistance, leading to difficulty controlling the car, especially at lower speeds.
Discuss the causes and fixes for P1651 2010 Ford Fusion OBDII Code
Code P1651 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
