P1650 2010 Ford Fusion Code - Power Steering Pressure Switch Out of Self-Test Range
Quick Answer
In the key ON engine OFF (KOEO) self-test, this code indicates the Power Steering Pressure (PSP) input to the Powertrain Control Module (PCM) is high. Common causes include Faulty Power Steering Pressure (PSP), Power Steering Pressure (PSP) harness is open or shorted, Power Steering Pressure (PSP) circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P1650 2010 Ford Fusion indicates Power Steering Pressure Switch Out of Self-Test Range.
- Common causes
- Common causes include Faulty Power Steering Pressure (PSP), Power Steering Pressure (PSP) harness is open or shorted, Power Steering Pressure (PSP) circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P1650 2010 Ford Fusion Description
What are the Possible Causes of the DTC P1650 2010 Ford Fusion?
- Faulty Power Steering Pressure (PSP)
- Power Steering Pressure (PSP) harness is open or shorted
- Power Steering Pressure (PSP) circuit poor electrical connection
- Damaged Powertrain Control Module (PCM)
How to Fix the DTC P1650 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1650 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1650 2010 Ford Fusion code?
Need more information on how to fix the P1650 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1650 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1650 2010 Ford Fusion Code
1. What are the common symptoms of OBDII code P1650 in a 2010 Ford Fusion?
- Common symptoms include loss of power steering assist, illuminated power steering warning light on the dashboard, and difficulty steering the vehicle.
2. What does the OBDII code P1650 "Power Steering Pressure Switch Out of Self-Test Range" mean in a 2010 Ford Fusion?
- This code indicates that there is a malfunction related to the power steering pressure switch that is outside the expected self-test range.
3. What are the potential causes of OBDII code P1650 in a 2010 Ford Fusion?
- The code P1650 in a 2010 Ford Fusion can be triggered by issues such as a faulty power steering pressure switch, damaged wiring or connectors, or a problem with the power steering control module.
4. How can I diagnose the OBDII code P1650 in my 2010 Ford Fusion?
- Diagnosing the code P1650 typically involves using an OBDII scanner to retrieve the code, checking the power steering pressure switch and associated wiring for faults, and testing the power steering system for proper functionality.
5. Can I still drive my 2010 Ford Fusion with OBDII code P1650?
- It is not recommended to drive the vehicle with code P1650 present, as it may result in loss of power steering assist, leading to potential safety hazards. It is advisable to address the issue promptly.
6. How can I repair OBDII code P1650 in a 2010 Ford Fusion?
- Repairing code P1650 may involve replacing the faulty power steering pressure switch, repairing any damaged wiring or connectors, or reprogramming the power steering control module, depending on the root cause of the issue.
7. Is it safe to reset the OBDII code P1650 in my 2010 Ford Fusion using a scanner?
- While resetting the code may temporarily turn off the warning light, it is important to address the underlying issue causing the code to prevent potential safety risks associated with power steering malfunctions.
8. How much does it cost to fix OBDII code P1650 in a 2010 Ford Fusion?
- The cost of fixing code P1650 can vary depending on the root cause of the issue and the repair needed. Costs may include parts, labor, and diagnostic fees from a mechanic or dealership.
9. Can a DIY enthusiast fix OBDII code P1650 in a 2010 Ford Fusion?
- While some experienced DIY enthusiasts may be able to diagnose and repair code P1650 themselves, it is recommended to seek professional help if unsure about the complexity of the repair or lack the necessary tools and expertise.
10. Will OBDII code P1650 in a 2010 Ford Fusion affect the vehicle's performance?
- Yes, code P1650 can impact the performance of the vehicle by causing issues with the power steering system, potentially leading to difficulty steering and compromised safety while driving.
Discuss the causes and fixes for P1650 2010 Ford Fusion OBDII Code
Code P1650 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
