AutoCodes – Ford – P1650 2008 Ford Fusion

P1650 2008 Ford Fusion Code - Power Steering Pressure Switch Out of Self-Test Range

Quick Answer

In the key ON engine OFF (KOEO) self-test, this code indicates the Power Steering Pressure (PSP) input to the Powertrain Control Module (PCM) is high. Common causes include Faulty Power Steering Pressure (PSP), Power Steering Pressure (PSP) harness is open or shorted, Power Steering Pressure (PSP) circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P1650 2008 Ford Fusion indicates Power Steering Pressure Switch Out of Self-Test Range.
Common causes: Common causes include Faulty Power Steering Pressure (PSP), Power Steering Pressure (PSP) harness is open or shorted, Power Steering Pressure (PSP) circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,837

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1650 2008 Ford Fusion Description

In the key ON engine OFF (KOEO) self-test, this code indicates the Power Steering Pressure (PSP) input to the Powertrain Control Module (PCM) is high. In the key ON engine running (KOER) self-test, this code indicates the PSP input did not change state.

OBDII Code P1650 2008 Ford Fusion - Power Steering Pressure Switch Out of Self-Test Range - AutoCodes.com — P1650 2008 Ford Fusion Code - Power Steering Pressure Switch Out of Self-Test Range

What does this mean?

What are the Possible Causes of the DTC P1650 2008 Ford Fusion?

Faulty Power Steering Pressure (PSP)
Power Steering Pressure (PSP) harness is open or shorted
Power Steering Pressure (PSP) circuit poor electrical connection
Damaged Powertrain Control Module (PCM)

How to Fix the DTC P1650 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1650 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1650 2008 Ford Fusion code?

Need more information on how to fix the P1650 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1650 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1650 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P1650 on a 2008 Ford Fusion?

- Common symptoms include hard steering, loss of power steering assist, illuminated power steering warning light, and difficulty turning the steering wheel.

2. What does the OBDII code P1650 in a 2008 Ford Fusion indicate?

- The code P1650 indicates that the power steering pressure switch is out of self-test range, signaling a potential issue with the power steering system.

3. What are the possible causes of code P1650 on a 2008 Ford Fusion?

- Possible causes include a faulty power steering pressure switch, wiring issues, low power steering fluid levels, a malfunctioning power steering pump, or a problem with the power steering control module.

4. How can I diagnose the cause of OBDII code P1650 on my 2008 Ford Fusion?

- Use a diagnostic scanner to retrieve the trouble codes and perform a thorough inspection of the power steering pressure switch, wiring connections, power steering fluid levels, and related components.

5. Can I continue driving my 2008 Ford Fusion with OBDII code P1650?

- It is not recommended to continue driving with code P1650 as it can lead to loss of power steering assist, making it challenging to steer the vehicle safely.

6. Is it safe to reset the OBDII code P1650 in my 2008 Ford Fusion?

- While you can clear the code temporarily, it is crucial to address the underlying issue causing code P1650 to prevent potential safety hazards and further damage to the power steering system.

7. How can I repair OBDII code P1650 on my 2008 Ford Fusion?

- Repair options may include replacing the power steering pressure switch, repairing wiring issues, checking and refilling power steering fluid, inspecting the power steering pump, or addressing faults in the control module.

8. Will OBDII code P1650 on a 2008 Ford Fusion affect vehicle performance?

- Yes, code P1650 can impact the performance of the power steering system, leading to difficulty in steering, especially at low speeds or when parking.

9. Can a DIY enthusiast fix OBDII code P1650 on a 2008 Ford Fusion?

- Depending on your automotive skills and access to tools, some DIY enthusiasts may be able to address code P1650 by replacing the power steering pressure switch or checking for wiring issues.

10. How much does it typically cost to repair OBDII code P1650 on a 2008 Ford Fusion?

- The cost of repairing code P1650 can vary depending on the exact cause of the issue, but it may involve parts and labor expenses ranging from $100 to $400, or more if additional components need replacement.