P163A GMC Code - Control Module Fuel Pressure Regulator 1 Control System Circuitry Performance
Quick Answer
This diagnostic applies to internal microprocessor integrity conditions within the Engine Control Module (ECM) or an out-of-range high-pressure fuel pump actuator current. Common causes include Faulty High Pressure Fuel Pump, High Pressure Fuel Pump harness is open or shorted, High Pressure Fuel Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P163A GMC indicates Control Module Fuel Pressure Regulator 1 Control System Circuitry Performance.
- Common causes
- Common causes include Faulty High Pressure Fuel Pump, High Pressure Fuel Pump harness is open or shorted, High Pressure Fuel Pump circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P163A GMC Description
What are the Possible Causes of the DTC P163A GMC?
- Faulty High Pressure Fuel Pump
- High Pressure Fuel Pump harness is open or shorted
- High Pressure Fuel Pump circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P163A GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P163A GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P163A GMC code?
Need more information on how to fix the P163A GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P163A GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P163A 2014 GMC Sierra — Control Module Fuel Pressure Regulator 1 Control System Circuitry Performance
- P163A 2015 GMC Sierra — Control Module Fuel Pressure Regulator 1 Control System Circuitry Performance
- P163A 2016 GMC Sierra — Control Module Fuel Pressure Regulator 1 Control System Circuitry Performance
- P163A 2017 GMC Sierra — Control Module Fuel Pressure Regulator 1 Control System Circuitry Performance
- P163A 2018 GMC Sierra — Control Module Fuel Pressure Regulator 1 Control System Circuitry Performance
Frequently Asked Questions about P163A GMC Code
1. What are the common symptoms of OBDII code P163A in a GMC vehicle?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and possible stalling.
2. What could cause the OBDII code P163A related to the Control Module Fuel Pressure Regulator 1 Control System Circuitry Performance?
- The code may be triggered by issues such as a faulty fuel pressure regulator, wiring problems, or a malfunctioning control module.
3. How can I diagnose the cause of OBDII code P163A in my GMC vehicle?
- To diagnose the issue, you may need to perform a thorough inspection of the fuel pressure regulator, check the wiring for any damage, and use a diagnostic tool to scan for specific faults.
4. What are some repair tips for resolving OBDII code P163A in a GMC vehicle?
- Repair tips may include checking and replacing the fuel pressure regulator, repairing or replacing damaged wiring, and resetting the control module.
5. Can OBDII code P163A be safely driven with until repaired?
- It is not recommended to drive with OBDII code P163A present, as it can lead to further damage to the engine and may result in poor vehicle performance.
6. How much does it typically cost to repair OBDII code P163A in a GMC vehicle?
- The cost of repair can vary depending on the specific issue causing the code, but it may range from $200 to $500 for parts and labor.
7. Will resetting the check engine light resolve OBDII code P163A?
- Resetting the check engine light may temporarily clear the code, but it will likely reappear if the underlying issue is not addressed and resolved.
8. Can a DIY enthusiast fix OBDII code P163A, or is it best left to a professional mechanic?
- While some DIY enthusiasts may be able to diagnose and fix the issue themselves, it is recommended to seek the expertise of a professional mechanic for accurate diagnosis and repair.
9. Are there any preventive measures to avoid OBDII code P163A from occurring in the future?
- Regular maintenance of the fuel system, including checking and replacing the fuel pressure regulator as needed, can help prevent OBDII code P163A from occurring.
10. How long does it take to repair OBDII code P163A in a GMC vehicle?
- The repair time can vary depending on the complexity of the issue, but it may take a few hours to a full day for a mechanic to diagnose and fix the problem.
Discuss the causes and fixes for P163A GMC OBDII Code
Code P163A GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
