P1635 2010 Ford Fusion Code - Tire / Axle Ratio Out of Acceptable Range
Quick Answer
The All-Wheel Drive (AWD) system continuously monitors vehicle conditions and automatically adjusts the torque distribution between the front and rear wheels. Common causes include Incorrect tire size, Incorrect axle ratio, Incorrect Vehicle ID block configuration parameters. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1635 2010 Ford Fusion indicates Tire / Axle Ratio Out of Acceptable Range.
- Common causes
- Common causes include Incorrect tire size, Incorrect axle ratio, Incorrect Vehicle ID block configuration parameters.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1635 2010 Ford Fusion Description
What are the Possible Causes of the DTC P1635 2010 Ford Fusion?
- Incorrect tire size
- Incorrect axle ratio
- Incorrect Vehicle ID block configuration parameters
How to Fix the DTC P1635 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
After a new Powertrain Control Module (PCM) has been installed, the Vehicle Identification (VID) block must be programmed into the PCM.
There is a Factory Service Bulletin for the 2010 Ford Fusion
2010 Ford Fusion Factory Service Bulletin OBDII Code P1635
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1635 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1635 2010 Ford Fusion code?
Need more information on how to fix the P1635 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1635 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1635 2010 Ford Fusion Code
1. What are the common symptoms of OBDII code P1635 in a 2010 Ford Fusion related to the "Tire / Axle Ratio Out of Acceptable Range" issue?
- Common symptoms include traction control and ABS warning lights illuminated on the dashboard, as well as potential issues with the vehicle's stability control system.
2. What can cause the OBDII code P1635 to trigger on a 2010 Ford Fusion?
- The code P1635 can be triggered when the tire size or axle ratio of the vehicle deviates from the acceptable range programmed into the vehicle's computer system.
3. How can I diagnose the "Tire / Axle Ratio Out of Acceptable Range" issue triggering the P1635 code on my 2010 Ford Fusion?
- To diagnose the problem, you can start by checking the tire sizes on all four wheels to ensure they match the manufacturer's specifications. You may also need to inspect the axle ratio to verify if it's within acceptable limits.
4. Can I continue driving my 2010 Ford Fusion with the P1635 code related to the tire/axle ratio issue?
- It is not recommended to continue driving the vehicle with the P1635 code active, as it can affect the proper functioning of safety systems like traction control and stability control.
5. How can I reset the OBDII code P1635 on my 2010 Ford Fusion after addressing the tire/axle ratio issue?
- Once you have corrected the tire or axle ratio problem causing the P1635 code, you can reset the code using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.
6. Does fixing the tire/axle ratio issue causing the P1635 code on a 2010 Ford Fusion require professional repair?
- Depending on your mechanical skills and access to tools, you may be able to correct the tire or axle ratio problem yourself. However, if you are unsure or need assistance, it's recommended to consult a professional technician.
7. Are there any specific repair tips for resolving the tire/axle ratio issue associated with the P1635 code on a 2010 Ford Fusion?
- When addressing the tire/axle ratio issue, ensure to use the correct tire sizes recommended by the manufacturer and verify that the axle ratio matches the vehicle's specifications to prevent the code from reoccurring.
8. Can extreme weather conditions affect the triggering of the P1635 code in a 2010 Ford Fusion?
- Extreme weather conditions like severe cold or heat can potentially impact tire pressure and size, which may contribute to the triggering of the P1635 code related to the tire/axle ratio issue.
9. Will replacing a single tire on my 2010 Ford Fusion trigger the P1635 code if the new tire differs slightly in size from the others?
- Replacing a single tire with a slightly different size may not immediately trigger the P1635 code. However, it's advisable to maintain consistent tire sizes on all wheels to prevent potential issues with the tire/axle ratio.
10. How can I prevent the OBDII code P1635 related to the tire/axle ratio issue from occurring again in my 2010 Ford Fusion?
- To prevent the recurrence of the P1635 code, regularly monitor and maintain the correct tire sizes, ensure proper tire inflation, and adhere to the manufacturer's axle ratio specifications for your Ford Fusion.
Discuss the causes and fixes for P1635 2010 Ford Fusion OBDII Code
-
Keluar DTC p1635 setelah ganti roda ukuran 20' , ukuran ban yang standar 16'
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
