AutoCodes – Volkswagen – P1634 Volkswagen

P1634 Volkswagen Code - Accelerator Pedal Position Sensor 2 Signal High Input

Quick Answer

P1634 Volkswagen indicates Accelerator Pedal Position Sensor 2 Signal High Input. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1634 Volkswagen indicates Accelerator Pedal Position Sensor 2 Signal High Input.
Common causes
Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 12,220
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 02, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1634 Volkswagen Description

OBDII Code P1634 Volkswagen - Accelerator Pedal Position Sensor 2 Signal High Input - AutoCodes.com
P1634 Volkswagen Code - Accelerator Pedal Position Sensor 2 Signal High Input

What are the Possible Causes of the DTC P1634 Volkswagen?

  • Faulty Accelerator Pedal Position Sensor
  • Accelerator Pedal Position Sensor harness is open or shorted
  • Accelerator Pedal Position Sensor circuit poor electrical connection

How to Fix the DTC P1634 Volkswagen?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1634 Volkswagen code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1634 Volkswagen code?

Need more information on how to fix the P1634 Volkswagen code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1634 Volkswagen code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1634 Volkswagen Code

1. What does the OBDII code P1634 mean for a Volkswagen?

P1634 indicates a high input signal from Accelerator Pedal Position Sensor 2, suggesting an issue with the pedal sensor or its circuit.

2. What are the common symptoms of code P1634 in a Volkswagen?

Symptoms may include reduced engine performance, difficulty accelerating, limp mode activation, or the check engine light illuminating.

3. What causes the P1634 code to appear on a Volkswagen?

Possible causes include a faulty accelerator pedal position sensor, damaged wiring or connectors, or an issue with the vehicle's electronic control module (ECM).

4. Can I drive my Volkswagen with the P1634 code active?

Driving with P1634 is not recommended, as it can affect acceleration and engine performance, potentially leading to unsafe driving conditions.

5. How can I diagnose the P1634 code on my Volkswagen?

Start by inspecting the accelerator pedal position sensor, its wiring, and connectors for damage. Use a diagnostic scanner to verify sensor readings and check for additional codes.

6. How do I fix the P1634 code on a Volkswagen?

Repairs may include replacing the accelerator pedal position sensor, repairing damaged wiring or connectors, or reprogramming the ECM if necessary.

7. How much does it cost to repair code P1634 on a Volkswagen?

Repair costs vary depending on the issue. Sensor replacements typically cost $100-$300, while wiring or ECM repairs may be more expensive.

8. Can a dirty throttle body cause the P1634 code on a Volkswagen?

No, a dirty throttle body typically causes other codes, but P1634 specifically relates to the accelerator pedal position sensor.

9. Do I need special tools to fix the P1634 code on my Volkswagen?

Basic tools like a multimeter and an OBDII scanner are required for diagnosis. Sensor replacement may require standard automotive tools.

10. Will clearing the P1634 code with a scanner fix the issue?

Clearing the code may temporarily reset the warning, but the underlying issue must be addressed to prevent the code from returning.

Discuss the causes and fixes for P1634 Volkswagen OBDII Code

Code P1634 Volkswagen comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play