AutoCodes – Volkswagen – P1631 Volkswagen

P1631 Volkswagen Code - Accelerator Pedal Position Sensor 1 Signal Too High

Quick Answer

P1631 Volkswagen indicates Accelerator Pedal Position Sensor 1 Signal Too High. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1631 Volkswagen indicates Accelerator Pedal Position Sensor 1 Signal Too High.
Common causes
Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 17,245
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 02, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1631 Volkswagen Description

OBDII Code P1631 Volkswagen - Accelerator Pedal Position Sensor 1 Signal Too High - AutoCodes.com
P1631 Volkswagen Code - Accelerator Pedal Position Sensor 1 Signal Too High

What are the Possible Causes of the DTC P1631 Volkswagen?

  • Faulty Accelerator Pedal Position Sensor
  • Accelerator Pedal Position Sensor harness is open or shorted
  • Accelerator Pedal Position Sensor circuit poor electrical connection

How to Fix the DTC P1631 Volkswagen?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1631 Volkswagen code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1631 Volkswagen code?

Need more information on how to fix the P1631 Volkswagen code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1631 Volkswagen code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1631 Volkswagen Code

What does the OBDII code P1631 mean on a Volkswagen?

P1631 indicates that the signal from Accelerator Pedal Position Sensor 1 is too high, suggesting a potential issue with the sensor or its circuit.

What are the common symptoms of P1631 in a Volkswagen?

Symptoms may include reduced engine power, poor throttle response, the vehicle entering limp mode, or the Check Engine Light turning on.

What causes the P1631 code to appear?

Common causes include a faulty accelerator pedal position sensor, damaged wiring or connectors, issues with the throttle body, or a problem with the powertrain control module (PCM).

Can I drive my Volkswagen with a P1631 code?

Driving with this code is not recommended, as it can lead to limited acceleration, unpredictable throttle behavior, or the vehicle entering limp mode for safety.

How can I diagnose the P1631 code?

Start by inspecting the accelerator pedal sensor and its wiring for damage or loose connections. Use a multimeter to check sensor voltage levels and scan the PCM for related codes.

Is the P1631 code a serious issue?

Yes, it can affect throttle control and overall drivability. Addressing the problem promptly helps prevent further complications or unsafe driving conditions.

How do I fix the P1631 code in a Volkswagen?

Repairs may include replacing the accelerator pedal position sensor, repairing damaged wiring, cleaning or replacing the throttle body, or reprogramming the PCM if needed.

Can a dirty throttle body cause the P1631 code?

Yes, a dirty or malfunctioning throttle body can sometimes cause incorrect sensor readings, leading to this fault code.

How much does it cost to fix the P1631 code?

Repair costs can vary but typically range from $100 to $400, depending on whether the sensor, wiring, or throttle body needs replacement or repair.

Will clearing the P1631 code solve the issue?

Clearing the code may temporarily remove the Check Engine Light, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P1631 Volkswagen OBDII Code

Code P1631 Volkswagen comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play