P1631 Audi Code - Accelerator Pedal Position Sensor 1 Signal Too High
Quick Answer
P1631 Audi indicates Accelerator Pedal Position Sensor 1 Signal Too High. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1631 Audi indicates Accelerator Pedal Position Sensor 1 Signal Too High.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1631 Audi Description
What are the Possible Causes of the DTC P1631 Audi?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
How to Fix the DTC P1631 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1631 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1631 Audi code?
Need more information on how to fix the P1631 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1631 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1631 Audi Code
What does the OBDII code P1631 mean for an Audi?
The code P1631 indicates that the signal from Accelerator Pedal Position Sensor 1 is too high, suggesting a possible issue with the sensor or its circuit.
What are the common symptoms of code P1631 on an Audi?
Symptoms may include reduced engine performance, limited throttle response, difficulty accelerating, and potentially triggering the vehicle to enter "limp mode."
What causes the P1631 code on an Audi?
Common causes include a faulty accelerator pedal position sensor, damaged wiring or connectors in the sensor's circuit, or an issue with the engine control module (ECM).
Can I still drive my Audi with the P1631 code present?
Driving is possible but not recommended, as the vehicle may experience limited acceleration or enter limp mode, potentially causing unsafe driving conditions.
How can I diagnose code P1631 on an Audi?
You can diagnose the issue by inspecting the accelerator pedal position sensor, checking for damaged or loose wiring, and using a multimeter to test the sensor's voltage output.
How do I fix the P1631 code on an Audi?
Fixes may include replacing the accelerator pedal position sensor, repairing damaged wiring, securing loose connectors, or reprogramming or replacing the ECM.
What tools are needed to troubleshoot P1631 on an Audi?
Tools may include an OBDII scanner, a digital multimeter, and basic hand tools for accessing the sensor and wiring.
Can a dirty throttle body cause the P1631 code on an Audi?
While not a direct cause, a dirty throttle body can affect throttle response and should be inspected during diagnostics.
Is replacing the accelerator pedal position sensor the only solution for P1631?
No, the issue could also stem from wiring problems or ECM malfunctions, so thorough diagnostics are essential before replacing any components.
How much does it cost to repair P1631 on an Audi?
Repair costs vary but may range from $100 to $400, depending on whether you need to replace the sensor, repair wiring, or address ECM issues.
Discuss the causes and fixes for P1631 Audi OBDII Code
Code P1631 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
