P1631 2013 Toyota RAV4 Code - Communication Error from ECM to VSC
Quick Answer
The Engine Control Module (ECM) sends signals such as A/T information signals, dynamic radar cruise control operation signals, and brake operation demand signals to the Skid Control Electronic Control Unit (ECU) (Brake Actuator Assembly) when the dynamic radar cruise control is operating. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1631 2013 Toyota RAV4 indicates Communication Error from ECM to VSC.
- Common causes
- Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1631 2013 Toyota RAV4 Description
While the vehicle speed is 40 km/h (25 mph) or more and the dynamic radar cruise control system is operating (vehicle-to-vehicle distance control mode), if the ECM continuously receives a logical error signal from the skid control ECU (brake actuator assembly) for approximately 1 second or more the Diagnostic Trouble Code (DTC) will be set.
What are the Possible Causes of the DTC P1631 2013 Toyota RAV4?
- Faulty Skid Control ECU (Brake Actuator Assembly)
- Skid Control ECU harness is open or shorted
- Skid Control ECU circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1631 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1631 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1631 2013 Toyota RAV4 code?
Need more information on how to fix the P1631 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1631 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1631 2013 Toyota RAV4 Code
1. What does the OBDII code P1631 on a 2013 Toyota RAV4 mean?
The code P1631 indicates a communication error between the Engine Control Module (ECM) and the Vehicle Stability Control (VSC) system.
2. What are the common symptoms of a P1631 code in a 2013 Toyota RAV4?
Common symptoms include the VSC warning light illuminating on the dashboard, loss of traction control functionality, and potential issues with vehicle stability during driving.
3. What are the possible causes of a communication error (P1631) between the ECM and VSC in a 2013 Toyota RAV4?
Potential causes may include damaged wiring or connectors between the ECM and VSC, a faulty ECM or VSC module, or software communication issues within the vehicle's electronic systems.
4. How can I diagnose a P1631 code in my 2013 Toyota RAV4?
Diagnosis typically involves using a professional OBDII scanner to retrieve the specific fault codes, checking the wiring and connectors for damage, and performing a detailed inspection of the ECM and VSC components.
5. Can a DIY enthusiast repair a P1631 code in a 2013 Toyota RAV4?
Repairing a P1631 code may require advanced diagnostic skills and specialized tools, so it is recommended to consult a qualified mechanic or dealership for proper diagnosis and repair.
6. Is it safe to drive my 2013 Toyota RAV4 with a P1631 code?
Continuing to drive with a P1631 code may pose risks due to potential stability control issues. It is advisable to address the problem promptly to ensure safe operation of the vehicle.
7. How much does it typically cost to fix a P1631 code in a 2013 Toyota RAV4?
The cost of repairing a P1631 code can vary depending on the specific cause of the communication error. Costs may include diagnostic fees, parts replacement, and labor charges.
8. Are there any common temporary fixes for a P1631 code in a 2013 Toyota RAV4?
Temporary fixes are not recommended for a P1631 code, as addressing the underlying communication error is essential to maintain the vehicle's safety and performance.
9. Can a P1631 code in a 2013 Toyota RAV4 cause other issues if left unaddressed?
If left unaddressed, a P1631 code can potentially lead to further electronic system malfunctions, affecting the vehicle's overall performance and safety features.
10. How long does it usually take to repair a P1631 code in a 2013 Toyota RAV4?
The repair time for a P1631 code can vary based on the complexity of the issue and availability of parts. It is advisable to consult with a professional to get an accurate estimate of the repair timeline.
Discuss the causes and fixes for P1631 2013 Toyota RAV4 OBDII Code
Code P1631 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
