AutoCodes – KIA – P1613 KIA

P1613 KIA Code - MIL Request Signal Circuit High Input

Quick Answer

The Engine Control Module (ECM) is in constant communication with the other control units (e.g. Common causes include Faulty Malfunction Indicator Light (MIL), MIL harness is open or shorted, MIL circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1613 KIA indicates MIL Request Signal Circuit High Input.
Common causes: Common causes include Faulty Malfunction Indicator Light (MIL), MIL harness is open or shorted, MIL circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,091

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 31, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1613 KIA Description

The Engine Control Module (ECM) is in constant communication with the other control units (e.g. Transmission, Body, etc). When there is a problem with a system other than the engine control, the ECM is requested to turn the engine light ON and set the P1613 code.

OBDII Code P1613 KIA - MIL Request Signal Circuit High Input - AutoCodes.com — P1613 KIA Code - MIL Request Signal Circuit High Input

What does this mean?

What are the Possible Causes of the DTC P1613 KIA?

Faulty Malfunction Indicator Light (MIL)
MIL harness is open or shorted
MIL circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P1613 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

P1613 indicates that there one of the control module have requested the Engine Control Module (ECM) to turn ON the check engine lamp. Usually the P1613 code is combine with another code.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1613 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1613 KIA code?

Need more information on how to fix the P1613 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1613 KIA code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1613 KIA Code

1. What does OBDII code P1613 for KIA mean?

- The code P1613 indicates a problem with the MIL (Malfunction Indicator Lamp) Request Signal Circuit, specifically a high input signal.

2. What are the common symptoms of OBDII code P1613 in a KIA vehicle?

- Common symptoms include the Check Engine Light being illuminated on the dashboard, and in some cases, the vehicle may go into a reduced power mode.

3. What are the possible causes of OBDII code P1613 in a KIA car?

- The main causes can include a faulty MIL control unit, wiring issues in the MIL circuit, or a problem with the ECM (Engine Control Module).

4. How do I diagnose OBDII code P1613 on my KIA vehicle?

- Diagnosis typically involves using a diagnostic scanner to read the fault code, checking the MIL circuit for continuity and proper voltage, and inspecting the MIL control unit for any signs of damage.

5. Can I still drive my KIA with OBDII code P1613 present?

- It is generally not recommended to drive the vehicle with this code present, as it can lead to potential engine performance issues or further damage if left unresolved.

6. How can I repair OBDII code P1613 in my KIA car?

- Repairing this code often involves replacing the faulty MIL control unit, repairing any damaged wiring in the MIL circuit, or addressing any issues with the ECM as needed.

7. Is it necessary to reset the OBDII code P1613 after making repairs on a KIA vehicle?

- Yes, it is important to clear the fault code using a diagnostic scanner after repairs have been made to ensure the issue has been resolved and to turn off the Check Engine Light.

8. Can a DIY enthusiast fix OBDII code P1613 in a KIA, or is professional help required?

- Depending on the root cause of the issue, some DIYers with experience in automotive repair may be able to address this code. However, in more complex cases, it is recommended to seek professional help.

9. Are there any preventive maintenance steps to avoid OBDII code P1613 in a KIA vehicle?

- Regularly inspecting the wiring in the MIL circuit for damage or wear, and addressing any electrical issues promptly, can help prevent this code from occurring.

10. Does OBDII code P1613 affect the overall performance of a KIA vehicle?

- While the code itself may not directly impact performance, it is essential to address the underlying issue promptly to prevent any potential engine or drivability problems.