P1610 Infiniti Code - Lock Mode
Quick Answer
An immobilizer is an electronic device fitted to an automobile which prevents the engine from running unless the correct key is present. Common causes include Faulty or not programmed ignition key, Faulty IMMU, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1610 Infiniti indicates Lock Mode.
- Common causes
- Common causes include Faulty or not programmed ignition key, Faulty IMMU, Faulty Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1610 Infiniti Description
The microcircuit inside the key is activated by a small electromagnetic field which induces current to flow inside the key body, which in turn broadcasts a unique binary code which is read by the automobile's Engine Control Module (ECM). When the ECM determines that the coded key is both current and valid, the ECM activates the fuel-injection sequence.
The immobilizer function of the Infiniti Vehicle Immobilizer System (IVIS) or Nissan Anti-Theft System (NATS) consists of the following:
- NATS ignition key
- NATS antenna amp. located in the ignition key cylinder
- Body control module (BCM) or (IMMU)
- Engine Control Module (ECM)
- Security indicator lamp
What are the Possible Causes of the DTC P1610 Infiniti?
- Faulty or not programmed ignition key
- Faulty IMMU
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1610 Infiniti?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
If problem persists after disconnecting the car battery, try the following:
ESCAPE FROM LOCK MODE
1. Turn ignition switch OFF.
2. Turn ignition switch ON with registered key. (Do not start engine.) Wait 5 seconds.
3. Return the key to OFF position.
4. Repeat steps 2 and 3 twice (total of three cycles).
5. Start the engine.
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1610 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1610 Infiniti code?
Need more information on how to fix the P1610 Infiniti code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1610 Infiniti code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1610 Infiniti Code
No Frequently Asked Questions about P1610 Infiniti Code found.
Discuss the causes and fixes for P1610 Infiniti OBDII Code
Code P1610 Infiniti comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.