AutoCodes – Generic – P1607

P1607 Code - Powertrain Control Module Internal Circuit Malfunction

Quick Answer

The Powertrain Control Module (PCM) controls fuel injector timing and duration, idle speed, ignition and camshaft timing, PCM back-up functions, and other functions. Common causes include Faulty Engine Control Module (ECM), Faulty Powertrain Control Module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1607 indicates Powertrain Control Module Internal Circuit Malfunction.
Common causes
Common causes include Faulty Engine Control Module (ECM), Faulty Powertrain Control Module (PCM).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 82,902
How popular is this code, among other codes? Medium
Table of contents Created and updated by William Orellana on Jul 13, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1607 Description

The Powertrain Control Module (PCM) controls fuel injector timing and duration, idle speed, ignition and camshaft timing, PCM back-up functions, and other functions. The Powertrain Control Module monitors itself for malfunctions. The Diagnostic Trouble Code (DTC) will set when the Powertrain Control Module detects an internal circuit failure.
OBDII Code P1607 - Powertrain Control Module Internal Circuit Malfunction - AutoCodes.com
P1607 Code - Powertrain Control Module Internal Circuit Malfunction

What are the Possible Causes of the DTC P1607?

  • Faulty Engine Control Module (ECM)
  • Faulty Powertrain Control Module (PCM)

How to Fix the DTC P1607?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1607 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1607 code?

Need more information on how to fix the P1607 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1607 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1607 Code

1. What are common symptoms of OBDII code P1607, Powertrain Control Module Internal Circuit Malfunction?

- Common symptoms include engine stalling, rough idling, poor acceleration, and the illumination of the Check Engine Light.

2. What are the possible causes of OBDII code P1607?

- The code P1607 can be caused by issues such as a faulty powertrain control module (PCM), damaged wiring or connectors, or a software malfunction within the PCM.

3. How can I diagnose OBDII code P1607?

- Diagnosing code P1607 typically involves using an OBDII scanner to retrieve the code, checking for any related codes, inspecting the PCM and its connections, and testing the wiring for continuity and shorts.

4. Can I drive my vehicle with OBDII code P1607?

- While it may be possible to drive your vehicle with code P1607, it is not recommended as it can lead to further damage and potential safety hazards. It's best to address the issue promptly.

5. How can I repair OBDII code P1607?

- Repairing code P1607 may involve replacing the PCM, repairing or replacing damaged wiring or connectors, updating the PCM software, or performing a relearn procedure.

6. Is it safe to reset the Check Engine Light after fixing OBDII code P1607?

- Yes, it is safe to reset the Check Engine Light after fixing code P1607. This can be done using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.

7. Can a DIYer fix OBDII code P1607, or is professional help required?

- While some experienced DIYers may be able to address code P1607, it is recommended to seek professional help, especially when dealing with PCM-related issues, to ensure proper diagnosis and repair.

8. Will OBDII code P1607 cause my vehicle to fail an emissions test?

- Yes, code P1607 can cause your vehicle to fail an emissions test since it indicates a malfunction within the powertrain control module, which is crucial for proper emissions control.

9. How much does it typically cost to repair OBDII code P1607?

- The cost of repairing code P1607 can vary depending on the underlying cause, parts needed, labor rates, and whether you choose to DIY or seek professional help. Costs can range from a few hundred to over a thousand dollars.

10. Are there any preventive measures to avoid OBDII code P1607 in the future?

- To help prevent OBDII code P1607, it's advisable to regularly maintain your vehicle, address any warning signs promptly, avoid electrical system overloads, and ensure proper battery and alternator function.

Discuss the causes and fixes for P1607 OBDII Code

Code P1607 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play