AutoCodesAudi – P1602 Audi

P1602 Audi Code - Engine Control Module Supply Voltage Low From Battery

Quick Answer

Battery positive voltage is supplied to the Engine Control Module (ECM) even when the ignition switch is OFF for use by the Diagnostic Trouble Code (DTC) memory and air–fuel ratio adaptive control value memory, etc. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1602 Audi indicates Engine Control Module Supply Voltage Low From Battery.
Common causes
Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 29,629
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 20, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1602 Audi Description

Battery positive voltage is supplied to the Engine Control Module (ECM) even when the ignition switch is OFF for use by the Diagnostic Trouble Code (DTC) memory and air–fuel ratio adaptive control value memory, etc.
OBDII Code P1602 Audi - Engine Control Module Supply Voltage Low From Battery - AutoCodes.com
P1602 Audi Code - Engine Control Module Supply Voltage Low From Battery

What are the Possible Causes of the DTC P1602 Audi?

  • Faulty Engine Control Module (ECM)
  • Engine Control Module (ECM) harness is open or shorted
  • Engine Control Module (ECM) circuit poor electrical connection

How to Fix the DTC P1602 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1602 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1602 Audi code?

Need more information on how to fix the P1602 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1602 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1602 Audi Code

What does OBDII code P1602 mean for an Audi?

P1602 indicates that the Engine Control Module (ECM) has detected a low supply voltage from the battery.

What are the common symptoms of code P1602 in an Audi?

Symptoms may include difficulty starting the engine, intermittent stalling, poor engine performance, and illuminated check engine light.

What causes code P1602 to appear in an Audi?

The most common causes are a weak or failing battery, loose or corroded battery terminals, a faulty alternator, or damaged wiring to the ECM.

Can a weak battery trigger code P1602?

Yes, a weak or failing battery can cause low voltage supply to the ECM, triggering the P1602 code.

How is code P1602 diagnosed in an Audi?

Diagnosis involves checking battery voltage, inspecting battery terminals and wiring for damage or corrosion, and testing the alternator’s charging output.

What should I check first when troubleshooting code P1602?

Start by inspecting the battery for proper voltage and ensuring the connections are clean and secure.

Can driving with code P1602 cause damage to my Audi?

While the code itself may not directly cause damage, prolonged low voltage can lead to poor ECM performance and other electrical issues.

How can code P1602 be fixed in an Audi?

Fixes include replacing or charging the battery, cleaning battery terminals, repairing damaged wiring, or replacing a faulty alternator if necessary.

Will clearing the code P1602 fix the issue permanently?

No, clearing the code without addressing the underlying issue will likely result in the code returning.

What tools are needed to diagnose and repair code P1602?

You may need a multimeter to check voltage, an OBDII scanner to read and clear codes, and basic tools to inspect and repair electrical connections.

Discuss the causes and fixes for P1602 Audi OBDII Code

Code P1602 Audi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play