P15F5 Code - Crankshaft Torque Command Signal Message Counter Incorrect
Quick Answer
The Generator Control Module also called the Starter/Generator Control Module, is comprised of the following three control modules: the Hybrid/EV Powertrain Control Module 1, 14 V Power Module, and the Drive Motor Control Module. Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P15F5 indicates Crankshaft Torque Command Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Starter/Generator Control Module, Starter/Generator Control Module harness is open or shorted, Starter/Generator Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P15F5 Description
The Engine Control Module (ECM) is constantly sending the Hybrid/EV Powertrain Control Module 1 serial data messages containing commanded engine crankshaft data. These serial data messages are sent through circuits which are part of a communication network called the Controller Area Network (CAN). The Hybrid/EV Powertrain Control Module 1 sets Diagnostic Trouble Code (DTC) P15F5 when it detects a discrepancy in the structure of this message causing its integrity to be questioned.
An intermittent fault in the CAN circuits will cause DTC P15F5 to set.
What are the Possible Causes of the DTC P15F5?
- Faulty Starter/Generator Control Module
- Starter/Generator Control Module harness is open or shorted
- Starter/Generator Control Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P15F5?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P15F5 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P15F5 code?
Need more information on how to fix the P15F5 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P15F5 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P15F5 Buick — Crankshaft Torque Command Signal Message Counter Incorrect
- P15F5 Cadillac — Crankshaft Torque Command Signal Message Counter Incorrect
- P15F5 Chevrolet — Crankshaft Torque Command Signal Message Counter Incorrect
- P15F5 GMC — Crankshaft Torque Command Signal Message Counter Incorrect
Frequently Asked Questions about P15F5 Code
1. What are the common symptoms of OBDII code P15F5?
The common symptoms of OBDII code P15F5 include rough engine idle, reduced engine performance, and potential stalling while driving.
2. What does the OBDII code P15F5 indicate?
OBDII code P15F5 indicates that the ECM has detected an issue with the crankshaft torque command signal message counter being incorrect.
3. What are the possible causes of OBDII code P15F5?
Possible causes of OBDII code P15F5 include a faulty crankshaft position sensor, issues with the engine control module (ECM), wiring problems, or a malfunctioning torque sensor.
4. How can I diagnose the OBDII code P15F5?
Diagnosing OBDII code P15F5 typically involves using a scan tool to read the code, checking the wiring and connections related to the crankshaft position sensor, and testing the sensor itself for proper functioning.
5. Can I continue driving with OBDII code P15F5 present?
It is not recommended to continue driving with OBDII code P15F5 present, as it can lead to further engine damage and potential safety issues. It is best to address the underlying problem as soon as possible.
6. How can I repair OBDII code P15F5?
Repairing OBDII code P15F5 may involve replacing the faulty crankshaft position sensor, addressing any wiring issues, or reprogramming the ECM. It is recommended to consult a professional mechanic for accurate diagnosis and repair.
7. Can OBDII code P15F5 be triggered by a loose gas cap?
No, OBDII code P15F5 is not related to a loose gas cap. This code specifically pertains to issues with the crankshaft torque command signal message counter.
8. Will resetting the OBDII code P15F5 make it go away permanently?
Resetting the OBDII code P15F5 may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear. It is crucial to diagnose and repair the root cause of the problem.
9. Is OBDII code P15F5 a common issue in specific vehicle makes or models?
OBDII code P15F5 may be more common in certain vehicle makes or models known for sensor or ECM-related issues. However, it can potentially occur in any vehicle equipped with OBDII systems.
10. Can a DIY enthusiast fix OBDII code P15F5 at home?
While some DIY enthusiasts may have the skills to diagnose and repair OBDII code P15F5 at home, it is recommended to seek professional help for accurate diagnosis and proper repair to avoid further complications.
Discuss the causes and fixes for P15F5 OBDII Code
Code P15F5 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
