P1598 Buick Code - Power Take Off Engine Speed Request Signal Message Counter Incorrect
Quick Answer
The Power Take-Off Control Module is constantly sending the Engine Control Module (ECM) serial data messages with information regarding its request for modifying engine speed. Common causes include Faulty Power Take-Off Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1598 Buick indicates Power Take Off Engine Speed Request Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Power Take-Off Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1598 Buick Description
The Diagnostic Trouble Code (DTC) will be set when the Power Take-Off Control Module detects a fault in the serial data message between the Power Take-Off Control Module and the Engine Control Module.
What are the Possible Causes of the DTC P1598 Buick?
- Faulty Power Take-Off Control Module
- Power Take-Off Control Module harness is open or shorted
- Power Take-Off Control Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1598 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1598 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1598 Buick code?
Need more information on how to fix the P1598 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1598 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1598 Buick Code
1. What does the OBDII code P1598 mean for a Buick?
P1598 indicates that the Power Take Off (PTO) Engine Speed Request Signal Message Counter is incorrect, typically due to a communication issue between the engine control module (ECM) and the PTO system.
2. What are the common symptoms of the P1598 code?
Symptoms may include a check engine light, reduced engine performance, or issues with the PTO system not functioning as expected.
3. What causes the P1598 code to appear?
The code can be caused by faulty wiring or connectors in the PTO system, a malfunctioning ECM, a defective PTO switch, or software-related issues.
4. Can I drive my Buick with the P1598 code active?
While the vehicle may still be drivable, it’s not recommended to ignore the code as it can affect PTO system performance and potentially cause further damage.
5. How do I diagnose the P1598 code?
Start by inspecting the wiring and connectors for the PTO system, checking for damage or corrosion. Use a scan tool to monitor communication between the ECM and the PTO module.
6. What repairs are typically needed for the P1598 code?
Repairs may include fixing or replacing damaged wiring, updating ECM software, replacing a faulty PTO switch, or repairing the PTO module.
7. Does the P1598 code require ECM replacement?
Not always. ECM replacement is only necessary if it’s confirmed to be the root cause after ruling out wiring, software, and PTO component issues.
8. How much does it cost to fix the P1598 code on a Buick?
Repair costs vary depending on the exact cause, but it could range from $100 for wiring repairs to over $1,000 for ECM replacement or advanced diagnostics.
9. Can a low battery cause the P1598 code?
Yes, a low or weak battery can cause communication errors between modules, potentially triggering the P1598 code.
10. Can I reset the P1598 code without repairs?
You can clear the code with a scan tool, but if the underlying issue isn’t resolved, the code will likely return.
Discuss the causes and fixes for P1598 Buick OBDII Code
Code P1598 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
