AutoCodes – Jeep – P1595 Jeep

P1595 Jeep Code - Speed Control Solenoid Circuits

Quick Answer

The speed control system is electronically controlled and vacuum operated. Common causes include Faulty Speed Control Brake Switch (at the brake pedal), Speed Control Brake Switch harness is open or shorted, Speed Control Brake Switch electrical circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P1595 Jeep indicates Speed Control Solenoid Circuits.
Common causes: Common causes include Faulty Speed Control Brake Switch (at the brake pedal), Speed Control Brake Switch harness is open or shorted, Speed Control Brake Switch electrical circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,388

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 20, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1595 Jeep Description

The speed control system is electronically controlled and vacuum operated. Electronic control of the speed control system is integrated into the Powertrain Control Module (PCM). The controls consist of two steering wheel mounted switches. The switches are labeled: ON/OFF, RES/ACCEL, SET, COAST, and CANCEL. The system is designed to operate at speeds above 30 mph (50 km/h).

OBDII Code P1595 Jeep - Speed Control Solenoid Circuits - AutoCodes.com — P1595 Jeep Code - Speed Control Solenoid Circuits

What does this mean?

What are the Possible Causes of the DTC P1595 Jeep?

Faulty Speed Control Brake Switch (at the brake pedal)
Speed Control Brake Switch harness is open or shorted
Speed Control Brake Switch electrical circuit poor electrical connection
Faulty Brake Lamp Switch (at the brake pedal)

How to Fix the DTC P1595 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1595 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1595 Jeep code?

Need more information on how to fix the P1595 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1595 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.