AutoCodesAudi – P1593 Audi

P1593 Audi Code - Altitude Adoption Signal Outside Tolerance

Quick Answer

Throttle control unit incorporates the following components: Throttle Position (TP) Sensor, Close Throttle Position (CTP) Switch (if fitted), Idle Speed Control (ISC) Actuator/Position Sensor or Throttle Motor/Position Sensor. Common causes include Faulty Throttle Control Unit, Throttle Control Unit harness is open or shorted, Throttle Control Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1593 Audi indicates Altitude Adoption Signal Outside Tolerance.
Common causes
Common causes include Faulty Throttle Control Unit, Throttle Control Unit harness is open or shorted, Throttle Control Unit circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,689
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 20, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1593 Audi Description

Throttle control unit incorporates the following components: Throttle Position (TP) Sensor, Close Throttle Position (CTP) Switch (if fitted), Idle Speed Control (ISC) Actuator/Position Sensor or Throttle Motor/Position Sensor.
OBDII Code P1593 Audi - Altitude Adoption Signal Outside Tolerance - AutoCodes.com
P1593 Audi Code - Altitude Adoption Signal Outside Tolerance

What are the Possible Causes of the DTC P1593 Audi?

  • Faulty Throttle Control Unit
  • Throttle Control Unit harness is open or shorted
  • Throttle Control Unit circuit poor electrical connection

How to Fix the DTC P1593 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1593 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1593 Audi code?

Need more information on how to fix the P1593 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1593 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1593 Audi Code

What does the OBDII code P1593 mean for an Audi?

The code P1593 indicates that the Altitude Adoption Signal is outside its expected tolerance, meaning the engine control module is detecting an issue with adapting to altitude changes.

What are common symptoms of the P1593 code in an Audi?

Symptoms may include reduced engine performance, poor fuel efficiency, difficulty starting, or inconsistent idle.

What causes the P1593 code in an Audi?

This code is typically caused by a faulty altitude sensor, issues with the manifold absolute pressure (MAP) sensor, or wiring and connection problems related to these sensors.

Can a dirty air filter cause the P1593 code?

Yes, a clogged or dirty air filter can restrict airflow, potentially contributing to altitude adaptation issues.

How can I diagnose the P1593 code on my Audi?

Start by inspecting the MAP sensor, altitude sensor, and their wiring connections. You can also use a diagnostic scan tool to check sensor readings and compare them to factory specifications.

Can the P1593 code cause damage to my Audi's engine?

While it may not directly cause damage, prolonged driving with this code can lead to increased fuel consumption and potential strain on the engine components.

How do I fix the P1593 code in my Audi?

Repairs typically involve replacing a faulty altitude sensor or MAP sensor, cleaning or replacing the air filter, and checking for damaged wiring or connectors.

Will clearing the P1593 code solve the issue permanently?

Clearing the code may temporarily remove the warning, but if the underlying issue is not fixed, the code will likely return.

Is the P1593 code common in Audi vehicles?

It’s not extremely common but can occur, especially in older models or vehicles frequently driven in varying altitudes.

Can I still drive my Audi with the P1593 code present?

Driving with this code is possible but not recommended, as it can lead to reduced performance and fuel efficiency. Addressing the issue promptly is advised.

Discuss the causes and fixes for P1593 Audi OBDII Code

Code P1593 Audi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play