P158F 2018 GMC Sierra Code - Power Take-Off Remote Arm Switch Performance
Quick Answer
The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take-Off Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P158F 2018 GMC Sierra indicates Power Take-Off Remote Arm Switch Performance.
- Common causes
- Common causes include Faulty Power Take-Off Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P158F 2018 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Power Take-Off Control Module detects a remote arm switch stuck in the closed position for greater than 20 s.
What are the Possible Causes of the DTC P158F 2018 GMC Sierra?
- Faulty Power Take-Off Control Module
- Power Take-Off Control Module harness is open or shorted
- Power Take-Off Control Module circuit poor electrical connection
How to Fix the DTC P158F 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P158F 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P158F 2018 GMC Sierra code?
Need more information on how to fix the P158F 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P158F 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P158F 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code P158F in a 2018 GMC Sierra related to the Power Take-Off Remote Arm Switch Performance?
- Common symptoms include difficulty engaging the power take-off (PTO) system, erratic PTO operation, and potential loss of power to auxiliary equipment.
2. What can cause the OBDII code P158F to trigger in a 2018 GMC Sierra?
- The code may be triggered due to a faulty power take-off (PTO) remote arm switch, damaged wiring or connectors, or a malfunction in the PTO control module.
3. How can I diagnose the OBDII code P158F in my 2018 GMC Sierra?
- Diagnosing the code involves checking the condition of the PTO remote arm switch, inspecting the wiring for any damage, and using a diagnostic scanner to retrieve specific fault codes.
4. Is it safe to continue driving my 2018 GMC Sierra with the OBDII code P158F related to the Power Take-Off Remote Arm Switch Performance?
- It is not recommended to continue driving with this code active, as it can lead to potential issues with the power take-off system and affect the operation of auxiliary equipment.
5. Can I reset the OBDII code P158F in my 2018 GMC Sierra without fixing the underlying issue?
- While you can clear the code temporarily, it is important to address the root cause to prevent it from reoccurring and ensure proper functionality of the power take-off system.
6. What are some repair tips for fixing the OBDII code P158F in a 2018 GMC Sierra?
- Repair tips may include replacing the faulty PTO remote arm switch, repairing damaged wiring or connectors, and reprogramming or replacing the PTO control module if necessary.
7. How much does it typically cost to repair the OBDII code P158F related to the Power Take-Off Remote Arm Switch Performance in a 2018 GMC Sierra?
- Repair costs can vary depending on the specific issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can a DIY enthusiast fix the OBDII code P158F in a 2018 GMC Sierra, or is it best left to professionals?
- While some DIY enthusiasts may be able to tackle simple repairs like replacing the PTO remote arm switch, more complex issues may require the expertise of a professional technician.
9. Will fixing the OBDII code P158F in my 2018 GMC Sierra improve fuel efficiency or performance?
- Resolving the code related to the Power Take-Off Remote Arm Switch Performance is unlikely to have a direct impact on fuel efficiency or overall vehicle performance, but it will ensure proper operation of the power take-off system.
10. How often does the OBDII code P158F related to the Power Take-Off Remote Arm Switch Performance occur in 2018 GMC Sierra vehicles?
- The occurrence of this code can vary, but it is not considered a common issue in 2018 GMC Sierra vehicles.
Discuss the causes and fixes for P158F 2018 GMC Sierra OBDII Code
Code P158F 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
