P1583 GMC Code - Cruise Direction CircuitHigh Voltage
Quick Answer
P1583 GMC indicates Cruise Direction CircuitHigh Voltage. Common causes for P1583 GMC include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1583 GMC indicates Cruise Direction CircuitHigh Voltage.
- Common causes
- Common causes for P1583 GMC include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1583 GMC Description
How to Fix the DTC P1583 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1583 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1583 GMC code?
Need more information on how to fix the P1583 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1583 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1583 GMC Code
1. What does the OBDII code P1583 indicate on a GMC vehicle?
The code P1583 indicates that there is an issue with the cruise control direction circuit, specifically detecting high voltage in the system that is outside the normal operating range.
2. What are common symptoms of code P1583 in a GMC?
Symptoms may include the cruise control not working properly, the cruise control failing to set or resume speed, and possibly other erratic vehicle behavior related to speed control.
3. What can cause the P1583 code to appear on my GMC?
Possible causes include a faulty cruise control switch, wiring issues such as shorts or frayed wires in the cruise control circuit, or a malfunctioning cruise control module.
4. How can I diagnose the P1583 code in my GMC?
Diagnosis should start with a visual inspection of the cruise control system’s wiring and connections. Use a multimeter to check for high voltage readings and continuity issues in the circuit. If the wiring looks good, further diagnosis of the cruise control switch and module may be necessary.
5. What are the steps to fix the P1583 code on a GMC?
Repair steps could include replacing a faulty cruise control switch, repairing or replacing damaged wires in the cruise control circuit, or replacing a defective cruise control module, depending on the specific diagnosis.
6. Is it safe to drive my GMC with the P1583 code?
While it might be safe to drive with this code, you will likely experience issues with the cruise control system. It’s best to address the problem promptly to restore full functionality to your vehicle's cruise control features.
7. Will ignoring the P1583 code lead to further vehicle damage?
Ignoring the P1583 code may not cause immediate further damage; however, it can lead to inconvenience and potentially mask other underlying issues if not addressed timely.
8. How urgent is it to fix a P1583 code on a GMC?
It is moderately urgent to fix this code mainly due to the inconvenience of losing cruise control functionality and to prevent potential complications from unresolved electrical issues.
Discuss the causes and fixes for P1583 GMC OBDII Code
Code P1583 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
