AutoCodes – Ford – P1575 2011 Ford Fusion

P1575 2011 Ford Fusion Code - Pedal Position Out of Self Test Range

Quick Answer

During Key On Engine Off (KOEO) self-test, the Powertrain Control Module (PCM) monitors the Accelerator Pedal Position (APP) sensor inputs to determine if the APP1 and APP2 signals are less than an expected value. Common causes include Accelerator pedal applied during key on engine off self-test. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1575 2011 Ford Fusion indicates Pedal Position Out of Self Test Range.
Common causes: Common causes include Accelerator pedal applied during key on engine off self-test.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,048

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1575 2011 Ford Fusion Description

OBDII Code P1575 2011 Ford Fusion - Pedal Position Out of Self Test Range - AutoCodes.com — P1575 2011 Ford Fusion Code - Pedal Position Out of Self Test Range

What does this mean?

What are the Possible Causes of the DTC P1575 2011 Ford Fusion?

Accelerator pedal applied during key on engine off self-test

How to Fix the DTC P1575 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Start by resetting the engine light, sometimes inappropriate acceleration could set the code.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1575 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1575 2011 Ford Fusion code?

Need more information on how to fix the P1575 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1575 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1575 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P1575 in a 2011 Ford Fusion?

The common symptoms of code P1575 "Pedal Position Out of Self Test Range" in a 2011 Ford Fusion may include rough idling, decreased engine performance, and the vehicle going into limp mode.

2. What can cause the OBDII code P1575 in a 2011 Ford Fusion?

The P1575 code in a 2011 Ford Fusion is often caused by a faulty accelerator pedal position sensor, wiring issues, or a problem with the electronic throttle control system.

3. How serious is the OBDII code P1575 in a 2011 Ford Fusion?

Code P1575 should be addressed promptly as it can affect the drivability of the vehicle and lead to potential safety issues if not resolved in a timely manner.

4. Can I continue driving my 2011 Ford Fusion with the P1575 code present?

It is not recommended to continue driving your Ford Fusion with the P1575 code present, as it can cause further damage to the engine and other components. It's best to address the issue as soon as possible.

5. How do I diagnose the OBDII code P1575 in my 2011 Ford Fusion?

Diagnosing the P1575 code requires a scan tool to retrieve the code, followed by inspecting the accelerator pedal position sensor, checking the wiring harness for any damage, and testing the electronic throttle control system.

6. What are some repair tips for fixing the P1575 code in a 2011 Ford Fusion?

Repair tips for resolving the P1575 code may include replacing the accelerator pedal position sensor, repairing or replacing damaged wiring, and resetting the electronic throttle control system.

7. Can a DIY enthusiast fix the P1575 code in a 2011 Ford Fusion?

While some DIY enthusiasts may have the skills to address the P1575 code, it's recommended to consult a professional mechanic for proper diagnosis and repair to ensure the issue is resolved correctly.

8. How much does it typically cost to repair the P1575 code in a 2011 Ford Fusion?

The cost of repairing the P1575 code in a 2011 Ford Fusion can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

9. Will clearing the P1575 code make it go away permanently?

Clearing the P1575 code without addressing the underlying issue will not make it go away permanently. The code is likely to reappear until the root cause of the problem is fixed.

10. Is it necessary to reset the vehicle's computer after repairing the P1575 code?

After repairing the P1575 code in a 2011 Ford Fusion, it's recommended to reset the vehicle's computer to clear the stored code and ensure proper functioning of the system.