AutoCodes – Ford – P1575 2009 Ford Fusion

P1575 2009 Ford Fusion Code - Pedal Position Out of Self Test Range

Quick Answer

During Key On Engine Off (KOEO) self-test, the Powertrain Control Module (PCM) monitors the Accelerator Pedal Position (APP) sensor inputs to determine if the APP1 and APP2 signals are less than an expected value. Common causes include Accelerator pedal applied during key on engine off self-test. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1575 2009 Ford Fusion indicates Pedal Position Out of Self Test Range.
Common causes: Common causes include Accelerator pedal applied during key on engine off self-test.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,669

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1575 2009 Ford Fusion Description

OBDII Code P1575 2009 Ford Fusion - Pedal Position Out of Self Test Range - AutoCodes.com — P1575 2009 Ford Fusion Code - Pedal Position Out of Self Test Range

What does this mean?

What are the Possible Causes of the DTC P1575 2009 Ford Fusion?

Accelerator pedal applied during key on engine off self-test

How to Fix the DTC P1575 2009 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Start by resetting the engine light, sometimes inappropriate acceleration could set the code.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1575 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1575 2009 Ford Fusion code?

Need more information on how to fix the P1575 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1575 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1575 2009 Ford Fusion Code

1. What are the common symptoms of OBDII code P1575 in a 2009 Ford Fusion?

The common symptoms of OBDII code P1575 in a 2009 Ford Fusion include issues with the accelerator pedal response, reduced engine performance, and the illumination of the check engine light.

2. What does the OBDII code P1575 "Pedal Position Out of Self Test Range" mean for a 2009 Ford Fusion?

The code P1575 indicates that the electronic control module has detected that the pedal position is outside the expected range during self-testing.

3. What are the possible causes of OBDII code P1575 in a 2009 Ford Fusion?

Possible causes of code P1575 in a 2009 Ford Fusion include a faulty accelerator pedal position sensor, wiring issues, or problems with the electronic control module.

4. How can I diagnose OBDII code P1575 in my 2009 Ford Fusion?

Diagnosing code P1575 may involve checking the accelerator pedal position sensor for proper operation, inspecting the wiring for any damage or loose connections, and using a scan tool to read the code and monitor sensor data.

5. Can I drive my 2009 Ford Fusion with OBDII code P1575?

It is not recommended to drive your 2009 Ford Fusion with code P1575 present, as it can lead to reduced engine performance and potential safety hazards due to issues with the accelerator pedal.

6. How can I repair OBDII code P1575 in my 2009 Ford Fusion?

Repairing code P1575 may involve replacing the faulty accelerator pedal position sensor, repairing any damaged wiring, or reprogramming the electronic control module to address the issue.

7. Is it safe to continue driving if the check engine light is on due to code P1575 in my 2009 Ford Fusion?

It is advisable to address the issue causing code P1575 and clear the code before continuing to drive your 2009 Ford Fusion to prevent any potential safety or performance issues.

8. Will resetting the OBDII code P1575 in my 2009 Ford Fusion make it go away permanently?

Simply resetting the code may temporarily turn off the check engine light, but if the underlying issue causing code P1575 is not fixed, the code is likely to return.

9. Do I need a professional mechanic to repair OBDII code P1575 in my 2009 Ford Fusion?

While some DIY enthusiasts may be able to diagnose and repair code P1575, it is recommended to seek the expertise of a professional mechanic for accurate diagnosis and proper repair of the issue.

10. How much does it typically cost to fix OBDII code P1575 in a 2009 Ford Fusion?

The cost of repairing code P1575 in a 2009 Ford Fusion can vary depending on the specific cause of the issue, but it may involve expenses for parts replacement, labor, and diagnostic services.