AutoCodes – Nissan – P1564 2008 Nissan Altima Sedan

P1564 2008 Nissan Altima Sedan Code - ASCD Steering Switch

Quick Answer

Automatic Speed Control Device (ASCD) (Cruise Control) steering switch has variant values of electrical resistance for each button. Common causes include Faulty ASCD Steering Switch, ASCD Steering Switch harness is open or shorted, ASCD Steering Switch circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P1564 2008 Nissan Altima Sedan indicates ASCD Steering Switch.
Common causes
Common causes include Faulty ASCD Steering Switch, ASCD Steering Switch harness is open or shorted, ASCD Steering Switch circuit poor electrical connection.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 10,613
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 21, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1564 2008 Nissan Altima Sedan Description

Automatic Speed Control Device (ASCD) (Cruise Control) steering switch has variant values of electrical resistance for each button. The Engine Control Module (ECM) reads the voltage variation of the switch and determines which button is operated. The Diagnostic Trouble Code (DTC) will be set when an improper voltage signal from the Automatic Speed Control Device steering switch is sent to Engine Control Module.
OBDII Code P1564 2008 Nissan Altima Sedan - ASCD Steering Switch - AutoCodes.com
P1564 2008 Nissan Altima Sedan Code - ASCD Steering Switch

What are the Possible Causes of the DTC P1564 2008 Nissan Altima Sedan?

  • Faulty ASCD Steering Switch
  • ASCD Steering Switch harness is open or shorted
  • ASCD Steering Switch circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P1564 2008 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1564 2008 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1564 2008 Nissan Altima Sedan code?

Need more information on how to fix the P1564 2008 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1564 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1564 2008 Nissan Altima Sedan Code

1. What does OBDII code P1564 for a 2008 Nissan Altima Sedan indicate?

The code P1564 on a 2008 Nissan Altima Sedan specifically pertains to the ASCD (Automatic Speed Control Device) Steering Switch.

2. What are the common symptoms of ASCD Steering Switch code P1564 in a 2008 Nissan Altima?

Common symptoms may include the inability to engage or disengage the cruise control, erratic cruise control operation, or the cruise control not functioning at all.

3. What are the possible causes of OBDII code P1564 in a 2008 Nissan Altima Sedan?

The code P1564 is typically triggered by a faulty ASCD Steering Switch, damaged wiring or connectors related to the switch, or a malfunction in the cruise control system.

4. How can I diagnose the ASCD Steering Switch code P1564 in my 2008 Nissan Altima Sedan?

Diagnosing the issue involves checking the ASCD Steering Switch for proper operation, inspecting the wiring and connectors for any damage, and using a scan tool to retrieve the specific error code.

5. Can I continue driving my 2008 Nissan Altima with the ASCD Steering Switch code P1564?

While the vehicle may still be driveable with this code present, it is recommended to address the issue promptly to avoid potential safety concerns and ensure the proper functioning of the cruise control system.

6. How can I repair OBDII code P1564 in my 2008 Nissan Altima Sedan?

Repairing the issue may involve replacing the faulty ASCD Steering Switch, repairing any damaged wiring or connectors, and clearing the error code with a scan tool.

7. Is it possible to reset the ASCD Steering Switch code P1564 in a 2008 Nissan Altima Sedan without repairs?

Resetting the code without addressing the underlying issue may temporarily clear the error, but it is likely to reappear until the root cause is resolved through proper repair.

8. Are there any preventive measures to avoid OBDII code P1564 in a 2008 Nissan Altima Sedan?

Regularly inspecting the cruise control system components, including the ASCD Steering Switch, and addressing any signs of wear or damage promptly can help prevent the occurrence of code P1564.

9. Can a DIY enthusiast fix the ASCD Steering Switch code P1564 in a 2008 Nissan Altima Sedan?

Depending on the individual's skill level and access to tools, DIY enthusiasts may be able to replace the ASCD Steering Switch or perform basic diagnostic steps. However, professional assistance is recommended for more complex repairs.

10. How much does it typically cost to repair OBDII code P1564 related to the ASCD Steering Switch in a 2008 Nissan Altima Sedan?

The cost of repair can vary depending on the extent of the issue, the need for parts replacement, and labor rates. It is advisable to consult a mechanic or dealership for an accurate estimate.

Discuss the causes and fixes for P1564 2008 Nissan Altima Sedan OBDII Code

  • I just start my car and loss power in a min the code1564

  • The P1564 is for the cruise control switch and that wont cause the car to loose power. That is the only code?

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play