P155D GMC Code - Hill Descent Control Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P155D GMC indicates Hill Descent Control Message Counter Incorrect.
- Common causes
- Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P155D GMC Description
What are the Possible Causes of the DTC P155D GMC?
- Faulty Transmission Control Module (TCM)
- Transmission Control Module harness is open or shorted
- Transmission Control Module circuit poor electrical connection
How to Fix the DTC P155D GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P155D GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P155D GMC code?
Need more information on how to fix the P155D GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P155D GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P155D 2014 GMC Sierra — Hill Descent Control Message Counter Incorrect
- P155D 2015 GMC Sierra — Hill Descent Control Message Counter Incorrect
- P155D 2016 GMC Sierra — Hill Descent Control Message Counter Incorrect
- P155D 2017 GMC Sierra — Hill Descent Control Message Counter Incorrect
- P155D 2018 GMC Sierra — Hill Descent Control Message Counter Incorrect
Frequently Asked Questions about P155D GMC Code
1. What are the common symptoms of OBDII code P155D GMC (Hill Descent Control Message Counter Incorrect)?
- The common symptoms include the illumination of the Check Engine Light (CEL) on the dashboard and a potential message related to Hill Descent Control displayed on the vehicle's information center.
2. What can cause the OBDII code P155D GMC to trigger?
- The code P155D GMC is triggered when the vehicle's onboard computer detects that the message counter for the Hill Descent Control system is not functioning as expected. This could be due to a software glitch, electrical issue, or sensor malfunction.
3. How serious is the OBDII code P155D GMC?
- The code P155D GMC is not typically considered a serious issue that affects the drivability or safety of the vehicle. However, it is still important to address the underlying problem to ensure all vehicle systems are functioning properly.
4. How can I diagnose the OBDII code P155D GMC?
- Diagnosing this code usually requires a professional OBDII scanner to retrieve the specific fault code. Additionally, a thorough inspection of the Hill Descent Control system, including sensors and wiring, may be necessary.
5. Can I continue driving with the OBDII code P155D GMC active?
- In most cases, it is safe to continue driving with the P155D GMC code active, especially if you are not experiencing any other noticeable issues with the vehicle's performance. However, it is recommended to have the issue diagnosed and repaired at your earliest convenience.
6. How can I repair the OBDII code P155D GMC?
- Repairing this code typically involves resetting the message counter for the Hill Descent Control system through a diagnostic tool. If the issue persists, further inspection of the system components may be necessary to identify and resolve the root cause.
7. Is the OBDII code P155D GMC easy to fix on my own?
- Fixing the P155D GMC code may require some technical knowledge and access to diagnostic tools. While resetting the message counter can sometimes be done by the vehicle owner, diagnosing and repairing underlying issues are best left to professional technicians.
8. Can extreme weather conditions trigger the OBDII code P155D GMC?
- Extreme weather conditions, such as heavy rain or snow, can sometimes contribute to electrical issues that may trigger the P155D GMC code. Ensuring proper vehicle maintenance and protection from the elements can help prevent such occurrences.
9. Will the OBDII code P155D GMC affect my vehicle's fuel efficiency?
- In general, the P155D GMC code is not directly related to fuel efficiency. However, unresolved issues with the Hill Descent Control system or other components could potentially impact overall vehicle performance, including fuel efficiency.
10. How much does it typically cost to repair the OBDII code P155D GMC at a dealership or repair shop?
- The cost of repairing the P155D GMC code can vary depending on the underlying issue and the labor rates of the dealership or repair shop. It is advisable to obtain a diagnosis and repair estimate from a trusted automotive professional before proceeding with the repairs.
Discuss the causes and fixes for P155D GMC OBDII Code
Code P155D GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
