P1553 Audi Code - Barometric/manifold Pressure Signal Ratio Out of Range
Quick Answer
P1553 Audi indicates Barometric/manifold Pressure Signal Ratio Out of Range. Common causes include Faulty Barometric Pressure Sensor, Barometric Pressure Sensor harness is open or shorted, Barometric Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1553 Audi indicates Barometric/manifold Pressure Signal Ratio Out of Range.
- Common causes
- Common causes include Faulty Barometric Pressure Sensor, Barometric Pressure Sensor harness is open or shorted, Barometric Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1553 Audi Description
What are the Possible Causes of the DTC P1553 Audi?
- Faulty Barometric Pressure Sensor
- Barometric Pressure Sensor harness is open or shorted
- Barometric Pressure Sensor circuit poor electrical connection
How to Fix the DTC P1553 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1553 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1553 Audi code?
Need more information on how to fix the P1553 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1553 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1553 Audi Code
1. What are the common symptoms of OBDII code P1553 in an Audi?
Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, and potential stalling.
2. What are the possible causes of OBDII code P1553 in an Audi?
The code P1553 typically indicates issues with the barometric/manifold pressure sensor, such as a faulty sensor, wiring problems, or a vacuum leak.
3. How can I diagnose the cause of OBDII code P1553 in my Audi?
Diagnosis usually involves checking the barometric/manifold pressure sensor for proper operation, inspecting related wiring for damage, and testing for vacuum leaks in the intake system.
4. Can a dirty air filter trigger OBDII code P1553 in an Audi?
Yes, a clogged or dirty air filter can disrupt the air intake, leading to incorrect pressure readings and potentially triggering the P1553 fault code.
5. Is it safe to continue driving my Audi with OBDII code P1553 present?
It is not recommended to drive the vehicle with a persistent P1553 fault code, as it can affect engine performance and fuel efficiency, leading to potential damage if left unresolved.
6. How can I reset OBDII code P1553 in my Audi?
Resetting the code can be done using an OBDII scanner or by disconnecting the car's battery for a few minutes. However, it is essential to address the underlying issue causing the code to prevent it from reoccurring.
7. Will OBDII code P1553 in an Audi cause the Check Engine Light to illuminate?
Yes, the presence of code P1553 will typically trigger the Check Engine Light to come on in an Audi to alert the driver of a potential issue with the barometric/manifold pressure sensor.
8. Can a DIY enthusiast repair OBDII code P1553 in an Audi?
Depending on the cause, some DIY enthusiasts may be able to address the issue themselves by replacing the sensor, fixing wiring problems, or repairing vacuum leaks. However, if unsure, it's best to consult a professional mechanic.
9. How much does it cost to repair OBDII code P1553 in an Audi?
The cost of repairing P1553 can vary depending on the root cause of the issue. It may range from a simple sensor replacement to more complex repairs involving wiring or vacuum system fixes.
10. Can a software update resolve OBDII code P1553 in an Audi?
In some cases, a software update from the manufacturer may address P1553-related issues, especially if they are related to sensor calibration or communication errors. Contacting an Audi dealership or authorized service center can provide more information on this option.
Discuss the causes and fixes for P1553 Audi OBDII Code
Code P1553 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
