AutoCodes - Nissan - P1550 2008 NISSAN ALTIMA SEDAN

P1550 2008 NISSAN ALTIMA SEDAN Code - Battery Current Sensor Circuit Range/Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P1550 2008 NISSAN ALTIMA SEDAN code possible causes

  • Faulty Battery Current Sensor
  • Battery Current Sensor harness is open or shorted
  • Battery Current Sensor circuit poor electrical connection

|How do I fix the P1550 2008 NISSAN ALTIMA SEDAN code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P1550 2008 NISSAN ALTIMA SEDAN code tech notes

Make sure the battery cables are not corroded and are clean and tight.

|Cost of diagnosing the P1550 2008 NISSAN ALTIMA SEDAN code

Labor: 1.0

The cost of diagnosing the P1550 2008 NISSAN ALTIMA SEDAN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P1550 2008 NISSAN ALTIMA SEDAN code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|P1550 2008 NISSAN ALTIMA SEDAN code description

The power generation voltage variable control enables fuel consumption to be decreased by reducing the engine load which is caused by the power generation of the generator. The battery current sensor is installed to the battery cable at the negative terminal. The sensor measures the charging/discharging current of the battery. Based on the sensor signal, Engine Control Module (ECM) judges whether or not the power generation voltage variable control is performed. When performing the power generation voltage variable control, ECM calculates the target power generation voltage based on the sensor signal. And ECM sends the calculated value as the power generation command value to IPDM E/R.
OBDII Code P1550 2008 Nissan Altima Sedan - Battery Current Sensor Circuit Range/Performance - AutoCodes.com

|Need more information with the P1550 2008 NISSAN ALTIMA SEDAN code?

Need more information on how to fix the P1550 2008 NISSAN ALTIMA SEDAN code?
Get Access to Factory Service Manuals

|Need help with a P1550 2008 NISSAN ALTIMA SEDAN code?

Get the P1550 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

|P1550 2008 NISSAN ALTIMA SEDAN code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P1550 2008 Nissan Altima Sedan code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
 
1=Easy 2=Moderate 3=Hard What is this?