AutoCodesGMC – P154D GMC

P154D GMC Code - Intake Air Heater Temperature Signal Circuit.

Quick Answer

The Intake Air Heater (IAH) is located in the air inlet tube and is used to warm the incoming air to aid in starting the engine and for proper cylinder combustion. Common causes include Faulty Intake Air Heater, Intake Air Heater harness is open or shorted, Intake Air Heater circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P154D GMC indicates Intake Air Heater Temperature Signal Circuit..
Common causes
Common causes include Faulty Intake Air Heater, Intake Air Heater harness is open or shorted, Intake Air Heater circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,293
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 01, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P154D GMC Description

The Intake Air Heater (IAH) is located in the air inlet tube and is used to warm the incoming air to aid in starting the engine and for proper cylinder combustion. The Glow Plug Control Module (GPCM) will command the IAH on when the engine coolant temperature is below 40°C (104°F). Power to the IAH is supplied by the battery positive voltage circuit. The IAH is connected to the GPCM by the following circuits. If there is a fault on any of these circuits a DTC will set.
- The IAH temperature signal circuit
- The IAH command 1 circuit
- The IAH command 2 circuit
- The IAH voltage signal circuit
- The IAH current signal circuit
- The IAH feedback signal circuit
OBDII Code P154D GMC - Intake Air Heater Temperature Signal Circuit. - AutoCodes.com
P154D GMC Code - Intake Air Heater Temperature Signal Circuit.

What are the Possible Causes of the DTC P154D GMC?

  • Faulty Intake Air Heater
  • Intake Air Heater harness is open or shorted
  • Intake Air Heater circuit poor electrical connection

How to Fix the DTC P154D GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P154D GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P154D GMC code?

Need more information on how to fix the P154D GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P154D GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P154D GMC Code

What does the OBDII code P154D signify in a GMC vehicle?

The OBDII code P154D indicates a problem with the intake air heater temperature signal circuit, which may affect the engine's performance and emissions.

What are the common symptoms associated with the P154D code?

Common symptoms include poor engine performance, reduced fuel efficiency, increased emissions, and potential engine misfire.

What could cause the P154D code to trigger?

Causes can include a faulty intake air heater, damaged wiring or connectors in the signal circuit, or issues with the engine control module (ECM).

How can I diagnose the P154D code?

Start by using an OBDII scanner to confirm the code. Then, inspect the intake air heater, check wiring and connectors for damage, and test the heater’s resistance.

What repairs are typically needed to fix the P154D code?

Repairs may involve replacing the intake air heater, repairing or replacing damaged wiring and connectors, or reprogramming or replacing the ECM if necessary.

Can I drive my GMC with the P154D code?

While it may be possible to drive the vehicle, it is not recommended due to potential performance issues and increased emissions.

Is it safe to clear the P154D code without making repairs?

Clearing the code without addressing the underlying issue is not recommended, as the problem will likely persist and can lead to further engine damage.

How can I prevent the P154D code from reoccurring?

Regular maintenance, including checking electrical connections and inspecting the intake air heater system, can help prevent this code from reappearing.

What should I do if the P154D code keeps coming back after repairs?

If the code persists, consider seeking professional diagnostics to check for other related issues, such as problems with the ECM or other sensors.

Discuss the causes and fixes for P154D GMC OBDII Code

Code P154D GMC comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play