AutoCodes – GMC – P153D 2014 GMC Sierra

P153D 2014 GMC Sierra Code - Driver Torque Request Signal Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P153D 2014 GMC Sierra indicates Driver Torque Request Signal Message Counter Incorrect.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 194

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 28, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P153D 2014 GMC Sierra Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the Driver Torque Request Signal Message Counter Incorrect.

OBDII Code P153D 2014 GMC Sierra - Driver Torque Request Signal Message Counter Incorrect - AutoCodes.com — P153D 2014 GMC Sierra Code - Driver Torque Request Signal Message Counter Incorrect

What does this mean?

What are the Possible Causes of the DTC P153D 2014 GMC Sierra?

Faulty Engine Control Module (ECM)
Engine Control Module harness is open or shorted
Engine Control Module circuit poor electrical connection

How to Fix the DTC P153D 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P153D 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P153D 2014 GMC Sierra code?

Need more information on how to fix the P153D 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P153D 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P153D 2014 GMC Sierra Code

1. What does the OBDII code P153D mean on a 2014 GMC Sierra?

P153D indicates an issue with the Driver Torque Request Signal Message Counter being incorrect, typically related to communication between the powertrain control module (PCM) and other systems.

2. What are the common symptoms of code P153D on a 2014 GMC Sierra?

Symptoms may include a check engine light, reduced engine performance, or limited throttle response.

3. What causes the P153D code to appear in a GMC Sierra?

The code can be triggered by faulty wiring, a malfunctioning PCM, a damaged accelerator pedal position sensor, or communication errors in the vehicle's CAN (Controller Area Network) system.

4. Can I drive my 2014 GMC Sierra with the P153D code active?

Driving is possible but not recommended, as the vehicle may enter limp mode or experience reduced performance, which can impact safety.

5. How do I diagnose the P153D code on my GMC Sierra?

Use an advanced OBDII scanner to check for related codes, inspect wiring and connectors for damage, and test the accelerator pedal position sensor for proper function.

6. What is the most common repair for a P153D code on a 2014 GMC Sierra?

The most common repair is addressing wiring issues or replacing the accelerator pedal position sensor if it is found to be malfunctioning.

7. Can a software update fix the P153D code on a GMC Sierra?

Yes, in some cases, a PCM or related module software update may resolve the issue if it is caused by a programming bug.

8. How much does it cost to fix the P153D code on a 2014 GMC Sierra?

Repair costs can range from $100 to $500, depending on whether the issue is with wiring, sensors, or requires a module replacement or reprogramming.

9. Could a dead battery cause the P153D code to appear?

Yes, a weak or dead battery may cause communication errors within the vehicleâ€™s systems, potentially triggering this code.

10. Do I need a professional mechanic to fix the P153D code?

While some issues like checking wiring or connectors can be handled by experienced DIYers, diagnosing and repairing module communication issues often require professional tools and expertise.